Description: The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small and LiPo-ready, it’s a very capable XBee-ready development board. The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Poly battery and you’re ready to go. Wireless sensor networks and communication are made easy by the on-board XBee socket. The ATmega32U4, running at 8MHz, makes it possible for you to use the on-board USB jack not only to charge a connected Li-Poly battery but to actually program the device! Because this board uses a similar bootloader to the one on the Pro Micro, you will need to download and install the special software driver below. There’s also a board definition add-on for the Arduino IDE which will add support for this board. Features: ATmega32U4 running at 8MHz Arduino-Compatible Bootloader XBee Socket Lithium Polymer Battery Compatible MCP73831T LiPo Charger Reset button On/Off Switch Status/Charge/RSSI LEDs [GitHub][1] (Design Files) Sparkfun link:https://www.sparkfun.com/products/11520 [1]: https://github.com/sparkfun/Fio_v3