© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD GroveSignalMOSFETSwitch
License: MIT
Mode: Editors' pick
This project is designed to take a standard grove input connector and use the 3.3V signal provided on that signal to switch 12V power on/off and send that to a load over Cat5E using a RJ45 connector. This is part of a 3 piece modular system that pairs with a Teensy Grove breakout board. The biggest flaw in this design is that it requires each set of 4 boards to have its own power supply which could get cumbersome if one decided to try and use all 24 usable pins.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | R-RJ45R08P-A004 | TOLOAD | RJ45-TH_R-RJ45R08P-A004 | 1 |
2 | M3 Mounting Hole | Z4,Z3,Z2,Z1 | M3 MOUNTING HOLE | 4 |
3 | 100 | R1-G,R2-G,R3-G,R4-G | R1206 | 4 |
4 | 1M | R4-S,R3-S,R2-S,R1-S | R0805 | 4 |
5 | PH-4AW | SIGNALIN | CONN-TH_4P-P2.00_PH--4AW | 1 |
6 | 100nF | C1,C2,C3,C4 | C1206 | 4 |
7 | DC-005-5A-2.0 | DC1 | DC-IN-TH_DC-005-5A-2.0 | 1 |
8 | 220uF | CTANK | CAP-SMD_BD6.3-L6.6-W6.6-RD | 1 |
9 | FDS8884 | Q1,Q2,Q3,Q4 | SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | 4 |
Unfold
Loading...
Do you need to add this project to the album?