Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
M4-GA-ROM-BC V2 Copyright 2013 (by Mark J. Blair) (by NF6X)
2 layer board of 1.67x1.52 inches (42.34x38.51 mm).
TRS-80 Model 4 (Gate Array Version) ROM B/C EPROM Adapter
This board allows a 2764 EPROM to be plugged into the ROM B/C socket (U4) of a TRS-80 Model 4 computer. It is applicable to the gate array version only, which is easily identified by noting the orientation of the RS-232 serial port connector. That connector will face towards the rear of the gate array version computer, or downwards on a non-gate-array version computer.
ROM B/C is an MCM68A364 mask-programmed ROM, and it is not pin-compatible with common 2764 EPROMs. This board adapts the pinout, and also allows the original mask-programmed ROM to be reinstalled and selected with a jumper or remote switch.
The primary motivation of this project is to support the new auto-boot menu feature of the FreHD hard disk emulator without requiring soldered modifications of the computer itself, and also allowing the original ROM to be selected when desired.
Design files for this project may be found at:
https://github.com/NF6X/M4-GA-ROM-BC
Additional information may be found at:
http://www.nf6x.net/tag/M4-GA-ROM-BC
M4-GA-ROM-BC is a free hardware design: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
M4-GA-ROM-BC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with M4-GA-ROM-BC. If not, see http://www.gnu.org/licenses/.
M4-GA-ROM-BC V2 Copyright 2013 (by Mark J. Blair) (by NF6X)
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to replicagames
Delete
Comment
Are you sure to delete the comment?
Report
M4-GA-ROM-BC V2 Copyright 2013 (by Mark J. Blair) (by NF6X)
No Profile
Announcer: replicagames
Creation time: 2018-05-23 00:57:23
Published time:
2021-01-25 22:07:02
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal