© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD NE5534 microphone preamp
License: GPL 3.0
Mode: Editors' pick
- 0
Update time：
2021-02-22 06:42:25
Creation time：
2021-02-07 11:37:44
Description
For more information about the project visit this Instructables page:
NE5534 Amplifier and vibration reducer
- Battery input is 4.2V MAX (single cell LiPo / LiIon)
- Power input is 6-10V from a DC-DC boost converter
- Use shielded cables for Mic in and Line out, preferably a ground plane on both sides of the PCB
- You may want to use a smaller cap than 1000uF for C4, put it on (thick) wires outside of the PCB or lay it horizontally
- You may want to use an LDO between the boost converter and power input to get rid ofnoise and ripple, ideally one with high PSR (like LM317)
- 220k potentiometer is optional (if unused, replace with a wire / 0ohm resistor)
Dont forget the ground plane !! Dont forget to connect all islands of the ground pane !!
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 1uF | C3 | CAP-TH_BD5.0-P2.00-D0.8-FD | 1 |
| 2 | HDR-F-2.54_1x2 | POWER_IN,MIC_IN,LINE_OUT | HDR-F-2.54_1X2 | 3 |
| 3 | 220k | POT | R_AXIAL-0.3 | 1 |
| 4 | NE5534P | U1 | DIP-8_L10.1-W6.3-P2.54-LS7.6-BL | 1 |
| 5 | BC547BTA | Q1 | TO-92-3_L4.8-W3.7-P2.54-L | 1 |
| 6 | LED-TH-3mm_G | LED2 | LED-TH_BD3.0_GREEN | 1 |
| 7 | 100nF | C5 | RAD-0.1 | 1 |
| 8 | 10uF | C6 | RAD-0.1 | 1 |
| 9 | HDR-M-2.54_1x1 | BAT | HDR-M-2.54_1X1 | 1 |
| 10 | 10uF | C1,C2,C7 | CAP-TH_BD5.0-P2.00-D0.8-FD | 3 |
| 11 | 1000uF | C4 | CAP-TH_BD5.0-P2.00-D0.8-FD | 1 |
| 12 | LED-TH-3mm_R | LED1 | LED-TH_BD3.0_RED | 1 |
| 13 | 1N4007 | D1 | DO-41_BD2.4-L4.7-P8.70-D0.9-RD | 1 |
| 14 | 1k | R1,R3,R7,R8 | R_AXIAL-0.4 | 4 |
| 15 | 220 | R2 | R_AXIAL-0.4 | 1 |
| 16 | 10k | R4 | R_AXIAL-0.4 | 1 |
| 17 | 68k | R5,R6 | R_AXIAL-0.4 | 2 |
Unfold
Project Members
1
0
Collect to album
Target complaint
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?