© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD KAMELECTROSPECTRE -Thermoplast
Mode: Editors' pick
Type 1
Open in EditorType 2
Open in EditorType 1 - edited 23.04.2020
Open in EditorType 2 - edited 23.04.2020
Open in EditorID | Name | Designator | Footprint | Quantity | BOM_Manufacturer Part |
---|---|---|---|---|---|
1 | Push Button Normally Open Momentary - Horizontal Symbol - HPB11 | U3,U4,U31,U32 | NONE | 4 | No |
2 | HMI DOP-B | U2,U14 | NONE | 2 | No |
3 | PLC DELTA DVP14SS2 | U1 | NONE | 1 | No |
4 | Magnetic Switch | U38 | NONE | 1 | No |
5 | DELTA DTC1000V | U5,U15,U20,U23,U16 | NONE | 5 | No |
6 | VFD007L21B | U6 | NONE | 1 | No |
7 | Power Source 1 Phase - Horizontal Symbol - HPW1_1PH | U12 | NONE | 1 | No |
8 | Encoder | U9,U29 | NONE | 2 | No |
9 | Thermocouple | U10,U17,U21,U24,U19 | NONE | 5 | No |
10 | Heater Element | U11 | NONE | 1 | No |
11 | 3 phase AC motor horizontal | U7,U28 | NONE | 2 | No |
12 | Solid State Relay | U39 | NONE | 1 | No |
13 | 1 | U8 | NONE | 1 | No |
14 | Circuit Breaker 2nd+ Pole - Vertical Symbol | QF1,QF2 | NONE | 2 | No |
15 | DELTA DVP14SS2 | U27 | NONE | 1 | No |
16 | Heater | U25,U35,U41,U43 | NONE | 4 | No |
17 | Inductive Switches - Ferrous | U36,U37 | NONE | 2 | No |
18 | Step Motor Simplifired | U22 | NONE | 1 | No |
19 | Power Source 1 Phase - Vertical Symbol - VPW1_1PH | U30 | NONE | 1 | No |
20 | Step Motor Driver Simplified | U18 | NONE | 1 | No |
21 | VFD022EL21A | U13 | NONE | 1 | No |
22 | Solid | U26,U40,U42,U44 | NONE | 4 | No |
23 | Circuit Breaker 1 Pole - Horizontal Symbol - HCB1 | U33 | NONE | 1 | No |
24 | Solenoid Valve | U34 | NONE | 1 | No |
Unfold
Loading...
Do you need to add this project to the album?