© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Attiny10 Programming Board
License: CC-BY-SA 3.0
Mode: Editors' pick
Attiny10 Programming Board is a tiny board for programming Attiny10 MCU into two programming modes. The slide switch controls programming modes. The upper position of the switch is a high voltage (12V) serial programming mode. The downer position of the switch is a TPI programming mode. You can use the high voltage serial programming for RSTDISBL fuse resetting.
AVRDude parameters for fuse resetting: avrdude -p t10 -c USBasp -P USB -x section_config -e
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 22u | C1,C2 | C1206 | 2 |
2 | 0.1u | C3 | C0603 | 1 |
3 | 1N5819W | D1 | SOD-123_L2.8-W1.8-LS3.7-RD | 1 |
4 | 1N4148WS | D2 | SOD-323_L1.8-W1.3-LS2.5-RD | 1 |
5 | HDR-F-2.54_1x3 | H1,H2 | HDR-F-2.54_1X3 | 2 |
6 | ISP AVR | J1 | ISP AVR | 1 |
7 | 22uH | L1 | IND-SMD_L3.0-W3.0_SMNR3015 | 1 |
8 | LED-0603_R | PWR | LED0603_RED | 1 |
9 | BSS84 | Q1 | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | 1 |
10 | 19.1k | R1 | R0603 | 1 |
11 | 1.0k | R2 | R0603 | 1 |
12 | 1k | R3 | R0603 | 1 |
13 | 33 | R4 | R0603 | 1 |
14 | 20k | R5 | R0603 | 1 |
15 | MSK-01S | SW1 | MSK-01S | 1 |
16 | MT3608 | U1 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | 1 |
17 | ATTINY10-TSHR | U2 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | 1 |
Unfold
Loading...
Do you need to add this project to the album?