© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Nano-BRK
License: CC-BY 3.0
Mode: Editors' pick
Nano breakout board.
Headers are included for all of the IO pins. It has room for pullup resistors for SDA (A4) and SCL (A5). The regulator space is for the 1117 LDO type 5v/1a. The regulator is optional and the VIN header goes to the VIN pin of the Nano and lets the onboard regulator do the powering. You will have to solder the jumper pad to use a regulator. If a regulator is not used, then VIN EXT can be used for external "V" pin header powering. This will allow for more power/voltage for servos or other devices.
The gerbers can be found here https://github.com/jscottb/pcbs along with others I have made.
Loading...
Do you need to add this project to the album?