Search results for New Schematic 2 copy

how to save the part that i edit at schematic into my part

...mbols as Private: New > Project Create a private project. New > Schematic Save the New Schematic to the Private project. Copy (CTRL+C) the symbol from your schematic and paste (CTRL+V) it into the New Schematic. Use the New Schematic as a private Schematic Symbol Library. You can of...

copy/paste schematic

hello How to copy/paste old schematic in new project ?. Hi ctrl+c, and ctr+v and you can use save as.. Or: then select the project you want to clone it to from the drop down list: ![enter image description here][2] Note that if you use CTRL+C and CTRL+V, you must have both the source and the destin...

Cut and Paste Symbol from Schematic to Schematic Lib

...ike EasyEDA you've done a great job. Now my issue: I created a symbol in a schematic. Now I want to reuse it. Is there a way to paste a symbol I created on a schematic into a Schematic Lib? Intuitively I thought'Copying' the symbol in the schematic and then 'Pasting' into the Schematic Lib should wo...

Exchange schematic between Projects

Feature Request Brief title for your desired feature: Take part of schematic and move to another sheet (another project) How would you like the feature to work? 1) capture part of sheet/schematic; 2) Ctrl+C; 3) switch to another project; 4) Ctrl+V. Why is this feature important to you? When I desig...

Schematic vs Schematic Module

What is the difference between a Schematic and Schematic Module? I am interested as I have a project from Altium to import and they show up as multiple schematics....not sure if I need to combine them into a single large schematic or if it is ok to have several separate schematics. Thanks. EasyEDA ...

Schematic and PCB layout re-use

Is it possible to use a schematic as a starter for 10 in a new schematic? In particular, is there a way to use the Arduino UNO shield as the staring point for a larger schematic/PCB that will preserve the Arduino interface connections and layout? If so, how? I've tried copy and paste, but that doesn...

How to create or edit a part and save it privately

After creating any Schematic or Spice symbol or PCB footprint the user is prompted to save it to My Parts. All parts in everyone's My Parts folder are public so they are automatically shared with all EasyEDA users. This post describes a way to save a Schematic or Spice symbol or PCB footprint privat...

Adding footprint for a Bourns_3005 to Schematic

I need a TRIMMER_BOURNS_3005 schematic layout. it is a screw POT ( 1 Meg ) I see I can add it to a PCB but how do I get it into my Schematic so I can get the foot print on the PCB. I used a trim pot in my Schematic but it is not the same Foot Print. Do I have to delete the image I have on the PCB a...

Lost my schematic!

I did a page refresh and I no longer have the tab with the schematic. I have the PCB that I generated from it but no schematic. How do I get my schematic back? I tried Open EasyEDA file, and I thought all my work was saved in the cloud, but it opens a file browser on my computer. I don't recall e...

Problem parsing a pasted-in edited TL081EE subckt?

.../easyeda.com/editor#id=B42omkh1n Steps to reproduce the problem. 1) Draw a schematic with the 5 pin Opamp and change the part name to TL081EE; 2) Copy the subckt for the TL081EE from the netlist for this schematic; 3) Paste it into this schematic; 4) Change the name of the subckt to make it differen...

No Padname related Netnames

I had to add a new component on the schematic and after wiring it in I updated the PCB and saw that the names of other pads hat changed to the name of the new compontens leg which gave me lots of work to rename all connections to the new pad name. So it would be great if net names were either change...

Creating the Schematic Libs - Tutorial

# Creating the Schematic Libs Using **Symbol Wizard** and **Group/Ungroup...** are a quick way to create schematic symbols but they are placed directly into the schematic that they are built in. It is possible to reuse them by copying them (`CTRL+C` hotkeys) from the schematic they were crea...

Part only in PCB view

...ller, but there is only a part with the correct footprint in PCB view, not schematic view. How do others resolve this? I did not know what to search for so I am sorry if this is something that has been answered many times before.. Hi, you need to create it by yourself.https://easyeda.com/Doc/Tuto...

How to load Image in your Schematic Background .

1、Create a new schematic in Google Chrome Browser. Notice : Other Browsers may not support this function . 2、Screenshot an Image 3、Then paste it to the Comment 4、In the schematic ,click the image button and insert Image . 5、Click Image ,and go to the Design Manager on the top of right side...

你现在访问的是EasyEDA海外版,不推荐使用,我们已经建立访问速度更快的中国区数据中心 https://LCEDA.cn
如果你已经有EasyEDA账号,请使用谷歌浏览器访问 https://easyeda.com/applyForLceda 进行数据迁移到中国区数据中心。
有问题联系QQ 3001956291 不再提醒