Search results for how to delete no connect

How to connect pads with ratlines

...omponent, so I would like to place the new components directly on the PCB, connect them temporarily with ratlines, delete the old component, and move around the new ones to find a good placement. When I select the "connect pad to pad" tool from the PCB tools the red cross hairs appear but I am not a...

Have the "No Connect" flags move with their associated parts

Feature Request Brief title for your desired feature: Have the "No Connect" flags move with their associated parts How would you like the feature to work? When I move a part with pins that are marked with "No Connect" flags, the flags should move with the part. Why is this feature important to you?...

Sancho_39 (red dots on wire)

... junction when there are should have. 1) T junction 2) more than two PINs connect together. Drag your resistor, check if there are two wires.. Junction: Just in the middle of a wire, how could I have done it? Not a T connection. I can’t reproduce it at the moment, but it showed up after saving, ...

How to connect top layer SMD pad to trace on bottom of PCB?

...plifier from TDA chips (link at bottom) and im trying to figure out how to connect an SMD pad on the top side of the PCB to a GND trace on the bottom side. i want to keep all my Vss and GND traces on the bottom and the rest on the top. https://easyeda.com/bassblaster505/TDA_2_1_Amplifier-6eb528577e8...

How do I cross a wire without creating a junction in a schematic

...er wire, but I do not want a junction point there because these should not connect. I can't delete the junction point and it is added automatically. So how do I do this?. this topic https://easyeda.com/bbs_view_1766.htm may help you. you just need to draw a wire cross over another wire, DON'T try to...

NaN is not permitted

...n't be export or only this one?. Only this one. I think maybe it`s somehow connected to this: ![enter image description here][2] [2]: /editor/20171018/59e743a22effc.png. I don`t know how to repair it. And how did it happen?. @kasmirov, Somewhere in your schematic you have a segment of wire that is n...

Sancho_70 (“Wires” don’t connect / Join)

a) In a schematic when I have an unconnected endpoint of a wire and later connect another wire (endpoint) it seems these two wires are not “soldered” together. This will lead to confusion in any way. Either melt them automatically (preferred) or ask (pop up) the user (bad). b) When I move a pice...

copper pour does not fill

...schematic I dont have a ground component included (only a pad that will be connected to a Battery minus contact). So obviously, there's no GND net in this schematic. In the PCB editor, the copper fill does not apply unless I add a GND connection. How do I achieve the copper fill without a GND net?. ...

Link SMD pad to bottom layer

...parts, but the PCB editor is still showing a design error - the pad is not connected to GND. Is this a simple design rule check error or would the pad really not be connected to the bottom layer? The project is public if anyone is willing to have a look: https://easyeda.com/zoltan.markella/TQFN_16_b...

Ready to order PCB, please help with review

...upling. 2.2) You have no net labels so it is impossible to understand what connects where to any of the external circuitry. You know how it is all wired up but that's in your head not anyone elses. 2.3) No datasheets etc. for external bits and pieces so it is not possible to say if the external inte...

Help for beginner

...u have chosen are almost unreadable. 3) You have the collector and emitter connections of the BC547 reversed. 4) There are no current limiting resistors in series with any of the LEDs. See: https://easyeda.com/andyfierman/LEDs_must_have_series_resistors-OoGYgCK2k 5) You have no information in your ...

Is it possible to replace packages on PCB?

...n some schematic and convert to PCB 2) Design the PCB to some point 3) Add connection between components in the PCB editor and draw trace for it 4) Move part of silkscreen like the + sign of electrolytic capacitor for multiple components 5) Delete silkscreen element of a footprint (for example some ...

Sancho_19 (tool selection and properties dialog)

...t works when you left click at the endpoint of the wire - in case it’s a connection point (e.g. a resistor) II) And my point was: The behavior of all tools must be the same: The toolbox icon and the cursor must reflect that the tool is selected. ---> There may be a tool (I dunno now) that will ...

2 Layers: Top with pads and Bottom with via

...question now if this can cause some problem with routing, with the pad not connected with a track.. Your project is private so only you can see it. To understand why you cannot just make a single sided PCB as described above and to answer your question, we need to be able to see your project: https:...

Problem snapping wires to pinouts

Sometimes I create wires connections in schematics correct, sometimes incorrect. The point that I believe I do something wrong, is that the wires I believe should remain connected to the parts I attached them to, however after whole schematics is done, I try to move with some parts, and all wires re...

你现在访问的是EasyEDA海外版,不推荐使用,我们已经建立访问速度更快的中国区数据中心 https://LCEDA.cn
如果你已经有EasyEDA账号,请使用谷歌浏览器访问 https://easyeda.com/applyForLceda 进行数据迁移到中国区数据中心。
有问题联系QQ 3001956291 不再提醒