Search results for pad no hole

Oval shaped pads without holes when exported

When using OVAL as pad shape, the hole is not present in the exported file (PDF or image). Steps to reproduce bug: create or modify a pad with oval shape in the PCB editor check in the Gerber Viewer (or photo view) that the hole in the oval shaped pad is correctly present export the PCB to PDF or ...

Hi, Stupid guestion. :)

Can you explain me via,hole / pad differences, are both copper plated and couple usage examples. Thanks!. Hi, If you are a newbie, this is a good question, you must understand them before you create a project.VIA which lets you swich a TRACK from TOP layer to bottom layer. in the bellow image, if yo...

PAD connect bottom layer?

Hello 1.PAD rectangle with the option 'all layers'' and the hole, is connected to the bottom layer? 2.PAD rectangle with the option 'all layers'' without a hole, is connected to the bottom layer?. Hi Avr, Yes. No because without a hole there can be no connection between top and bottom layer. Howeve...

Cannot set PCB pad size = hole size (V1.9.1 & V1.11.1)

...asyeda.com/bbs_view_966.htm you suggest that to make an unplated mounting hole: Why not put a PAD or Via with pad size = hole size? I just tried to: i) modify a pad to make pad size = hole size; ii) create a new PCB lib hole with pad size = hole size. I could not do it. The minimum (pad-hole) size...

Photo View does not shows holes unless there is a pad around it

BUG Concise problem statement: In Photo View, a hole with a pad on the top side only shows as a hole with a pad round it on the top layer view; a hole with a pad on the bottom side only shows as a hole with a pad round it on the bottom layer view; a hole with a pad on one side only is invisible...

Square holes VS Round holes

When adding headers to a PCB - Example here SIP2 and SIP3. Are square holes considered positive? Also, Is the square hole usually always pin 1 ? ![Round and square holes for mounting components][1] Thanks in advance for any help, Jimmy [1]: /editor/20161023/580bb3938d003.jpg. Hi Jimmy506, Welcome to...

Pads with different diameters on top and bottom

...ble to make double sided pad with top side diameter nearly the same as the hole diameter? Thanks, Mark. Is it possible to make round pads with different diameters for top and bottom? Not directly but you can try placing a double sided pad (All layers) and then placing a single (Top or Bottom layer o...

Castellated_Pad_Receptor (Footprint/Package: Castellated_Pad_Receptor)

Castellated_Pad_Receptor Castellated_Pad_Receptor

. Pad to accept the castellated pad (no hole)

PCB SOLDER PAD 2X1

PCB SOLDER PAD 2X1

. 2x1 no hole 5mm H x 3mm W Solder pad

Vias in Pads in Photo Viewer

BUG Concise problem statement: When using the Photo Viewer, any holes that are located in a pad appear underneath the pad. Steps to reproduce bug: Place an SMD component or Pad on top layer with no hole. Place a via in the pad. View the PCB in the Photo Viewer. Compare top and bottom layers. ...

Pads on All Layers with same netname do not show as error in Design Manager

...m statement: If you label the NET property for a pad on All layers with no hole as (for example) BOO then a net connected to the pad on the top layer will be netlabelled as BOO and a net connected to the pad on the bottom layer will also be netlabelled as BOO. This does not mean that they are connec...

Autorouter/Copper Areas tracks and copper through drill holes that have pads on only the opposite side

BUG Concise problem statement: The Autorouter does not seem to see holes from solder pads that are on one side of the board and routes tracks on the other side through them. The Copper area also does not recognise and keep clear the holes and a space around them if it is on the other face of the PC...

Beta 3.9.4 Feedback - Slots

Slots appear to work well. Consider changing the hole color from #000000 to #111111 now that it is possible to have slots without any border indicators. Without this, I could not find my NPTH slots since they have no border. If I create a 75mil diameter hole and a 75mil diameter slot, the hole ...

Pads with holes on single layer do not show holes in photo mode

...e sided PCB. I will be mounting parts on both sides. All parts are through-hole parts. One side, the top layer, has room for only LED's. The other side, the bottom layer, will be mounting several resistors. I am using 3 types of pads; top, bottom and all-layers. The DRC shows no errors on the layout...

Multi layer pads not connected

...nected to the GND pad on the bottom layer. So my question is, do I need a "hole" in the pad or something for it to be connected to the other/bottom side? In my screenshot I have selected the GND pad. Thanks! [1]: /editor/20171111/5a05eb52e6038.png. ![enter image description here][1] [1]: /editor/201...

你现在访问的是EasyEDA海外版,不推荐使用,我们已经建立访问速度更快的中国区数据中心 https://LCEDA.cn
如果你已经有EasyEDA账号,请使用谷歌浏览器访问 https://easyeda.com/applyForLceda 进行数据迁移到中国区数据中心。
有问题联系QQ 3001956291 不再提醒