Search results for pad without hole

Oval shaped pads without holes when exported

...d no hole is present (happend both in B/B and color export) ![exported PCB without holes][3] Browser: Chrome 62.0.3202.94 OSX, Safari [3]: /editor/20171216/5a34f2c69e431.png. This is a well known problem If you order PCB via gerber file, will no problems. Thanks. Is there a plan to solve this issue?...

PAD connect bottom layer?

...nnected to the bottom layer? 2.PAD rectangle with the option 'all layers'' without a hole, is connected to the bottom layer?. Hi Avr, Yes. No because without a hole there can be no connection between top and bottom layer. However, be careful: If you label the NET property for a pad on All layers w...

Hi, Stupid guestion. :)

... this kind information, The via is a NPTH hole (Non Plating Through Hole) without copper, the pad is a PTH hole (Plating Through Hole) with copper. How then you can use via in switching, if the are connected? small wire and tin..? No.. i have in my board only pad holes, and every trace go with the...

Beta 3.9.4 Feedback - Slots

...e hole color from #000000 to #111111 now that it is possible to have slots without any border indicators. Without this, I could not find my NPTH slots since they have no border. If I create a 75mil diameter hole and a 75mil diameter slot, the hole appears narrower than the slot. Angled slots were...

Multi layer pads not connected

... no hole in a pad then it cannot be connected to anything on another layer without explicit tracks and vias. Please see: https://easyeda.com/editor#id=a0cf7282b35140928ab93bc65c4b9cfb in: https://easyeda.com/andyfierman/Elements_of_a_simple_PCB-e42c7b2a4e17449f821a97d04806aeeb. Were you trying to ma...

Cloud Nine

Cloud Nine

...oles (Vertical 2U may conflict with Pro Micro unless clipped) PCB only use without plate possible LED backlighting (Requires 9 resistors, 1206 size, 2.7-3.3K ohms) No diodes, no transistors. WS2812B RGB strip support Powered by Pro Micro Extremely low cost and easy to assemble. Programmable via QMK...

2 Layers: Top with pads and Bottom with via

...as on the top layer than you get: which is identical to what you have now without the unnecessary top layer pads. I assume that the big central rectangular NPTH is intended to form a rectangular hole in the middle of the board? If so then what you have done is OK. You might want to have a look at: ...

DMP4015SK3

DMP4015SK3

...int has plated through hole under drain tab for hand soldering and removal without need for special tools. Resulting solder filled hole helps to act as heatsinking. Pad and hole can be connected to surrounding copper areas for additional heatsinking. Use of heat shunts for this is recommended to av...

DMP4015SK3 (Footprint/Package: DMP4015SK3_DPAK)

DMP4015SK3 DMP4015SK3_DPAK

...int has plated through hole under drain tab for hand soldering and removal without need for special tools. Resulting solder filled hole helps to act as heatsinking. Pad and hole can be connected to surrounding copper areas for additional heatsinking. Use of heat shunts for this is recommended to av...

when addig new pad inherit last clicked pad proprties

... by clicking a pad. this saves time. so one can add pads in diffrent order without having to enter the properties manually. @Sams Do you mean you need a Pad template.

delete a pad

...iscellaneous > Import Changes... If you have created the PCB directly without drawing a schemaitc then you can find out more in this thread: https://easyeda.com/bbs_view_1461.htm and in the EasyEDA Tutorial: https://easyeda.com/Doc/Tutorial/creatingThePCBLibs.html.

Autorouter/Copper Areas tracks and copper through drill holes that have pads on only the opposite side

... to complete. Then all is fine. The problem is that if it cannot complete without requiring a via to another layer then it will fail and you will have no routing on your target layer or what there is may not be useable. You cannot tell in advance on which nets it would require vias and somehow forc...

DMP4015SK3_DPAK

DMP4015SK3_DPAK

...int has plated through hole under drain tab for hand soldering and removal without need for special tools. Resulting solder filled hole helps to act as heatsinking. Pad and hole can be connected to surrounding copper areas for additional heatsinking. Use of heat shunts for this is recommended to av...

create pads

...t, GND). How can I assign pads that net so that I can attach wires to it?. Without sight of your project it is difficult to give an accurate, detailed response but in general if you want to connect wires directly to a PCB using through holes, then the simplest way to do it is to find a single pin he...

DMP4015SK3_DPAK_HS

DMP4015SK3_DPAK_HS

...int has plated through hole under drain tab for hand soldering and removal without need for special tools. Resulting solder filled hole helps to act as heatsinking. Pad and hole can be connected to surrounding copper areas for additional heatsinking. Use of heat shunts for this is recommended to av...

你现在访问的是EasyEDA海外版,不推荐使用,我们已经建立访问速度更快的中国区数据中心 https://LCEDA.cn
如果你已经有EasyEDA账号,请使用谷歌浏览器访问 https://easyeda.com/applyForLceda 进行数据迁移到中国区数据中心。
有问题联系QQ 3001956291 不再提醒