![enter image description here][1] ![enter image description here][2] ![enter image description here][3] ![enter image description here][4] **DESCRIPTION** BLE (dual) Bee v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions, Users can develop flexibly according to the serial baud rate, equipment name, pairing password. **Features:** BT Version: Bluetooth Specification V4.0 & BLE UART send and receive max bytes is 512 Other device to module in SPP mode: 90 Bytes per packet Other device to module in BLE mode: 20 Bytes per packet Two data transmission mode, balance mode and high speed mode Working frequency: 2.4GHz ISM band Modulation method: GFSK(Gaussian Frequency Shift Keying) RF Power: -23dbm, -6dbm, 0dbm, 6dbm. Speed: Asynchronous: 3K Bytes Synchronous: 3K Bytes Security: Authentication and encryption Service: Slave SPP, Peripheral BLE, UUID FFE0,FFE1 Power: +3.3VDC 50mA Long range: SPP 30 meters, BLE 60 metersPower: SPP 13.5mA, BLE 9.5mA Working temperature:–5 ~ +65 Centigrade **Specification:** ![enter image description here][5] U1:U1 is the wireless module,It includes automatic power on reset circuit. D3:The led display two work models: sleeping whit It slowly flashing;connected status whit It continuously lighting. JP1&JP3:The standard Bee connector. **Documents:** Please visit our [wiki][6] page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum. For more detail, please visit: http://www.seeedstudio.com/item_detail.html?p_id=2406 [1]: /editor/20160710/5782021e69a33.png [2]: /editor/20160710/5782022292145.png [3]: /editor/20160710/578202264aeb4.png [4]: /editor/20160710/5782022a31fc2.png [5]: /editor/20160710/5782023a7429d.png [6]: http://www.seeedstudio.com/wiki/BLE_(dual)_Bee_v1.0