Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
Xadow Basic Sensors
License: Public Domain
Mode:Editors' pick
1.6k
0
0
0
Update time:
2021-04-11 19:05:52
Creation time:
2016-01-11 02:08:39
Description
Xadow Basic Sensors integrates three different sensors on one single board:
3-Axis Accelerometer for motion detection, activity monitoring and speed tracking
Dual diode Digital Light Sensor that can separately measure infrared, full-spectrum or human-visible light
Temperature Sensor for temperature monitoring
Include
Xadow Basic Sensors * 1
FPC Cable 11 PIN * 2
Features:
Three-in-one sensor board
Plug-and-play if connected with RePhone Kit Create
Open source and modular design
Slim and small
Built-in 11 PIN Xadow Connectors for full flexible connection with other Xadow Modules
Stackable, chainable and sewable with other Xadow Modules
Technical Details
Microcontroller: STM32F030F4
Core: ARM® 32-bit Cortex® -M0 CPU
Power Supply: 3.3 – 6 V (via breakout pins)
Flash: 16 KB
SRAM: 4 KB
Clock Speed: 48 MHz
Operating Temperature Range: -30°C to 70°C
Interfaces: Interface with Xadow GSM+BLE through I2C (7-bit address 0x03)
Dimension: 25.37mm X 20.30mm / 1’’ X 0.8’
3-Axis Accelerometer (**ADXL345**):
Test g Range: ±2g (default), ±4g, ±8g, or ±16g
Resolution: Increase with g range, up to
13-bit resolution at ±16g
Digital Light Sensor (**TSL2561**):
Approximates Human Eye Response
Dynamic Range (Lux): 0.1 to 40,000 Lux
Dual Photodiodes: Infrared and full spectrum
Temperature Sensor (**LM75ADP**):
Temperature Range: -55°C to 125 °C
Accuracy: ± 2°C from -25°C to 100°C
± 3°C from -55°C to 125°C
![enter image description here][1]
From:For more detail, please visit: http://www.seeedstudio.com/item_detail.html?p_id=2555
Xadow Basic Sensors
Xadow Basic Sensors integrates three different sensors on one single board:
3-Axis Accelerometer for motion detection, activity monitoring and speed tracking
Dual diode Digital Light Sensor that can separately measure infrared, full-spectrum or human-visible light
Temperature Sensor for temperature monitoring
Features
Three-in-one sensor board
Plug-and-play if connected with RePhone Kit Create
Open source and modular design
Slim and small
Built-in 11 PIN Xadow Connectors for fully flexible connection with other Xadow Modules
Stackable, chain-able and sew-able with other Xadow Modules
Specification
Overview
Microcontroller STM32F030F4
Core ARM® 32-bit Cortex® -M0 CPU
Power Supply 3.3 ~ 6 V (via breakout pins)
Flash 16 KB
SRAM 4 KB
Clock Speed 48 MHz
Operating Temperature Range -30°C to 70°C
Interfaces Interface with Xadow GSM+BLE through I2C (7-bit address 0x03)
Dimension 25.37mm × 20.30mm / 1” × 0.8”
3-Axis Accelerometer (ADXL345)
Test g Range ±2g (default), ±4g, ±8g, or ±16g
Resolution Increase with g range, up to 13-bit resolution at ±16g
Digital Light Sensor (TSL2561) -- Approximates Human Eye Response
Dynamic Range (Lux) 0.1 to 40,000 Lux
Dual Photodiodes Infrared and full spectrum
Temperature Sensor (LM75ADP)
Temperature Range -55°C to 125 °C
Accuracy ± 2°C from -25°C to 100°C
± 3°C from -55°C to 125°C
Hardware Overview
![enter image description here][2]
Use it with RePhone Kit Create
Obtain the Sensor Data
Without any programming, you can connect it to the Core Module (Xadow GSM+BLE) of your ‘RePhone Kit Create' to read all the data from the sensors.
![enter image description here][3]
Set 'If This Then That
You can also set the sensor data as a condition to trigger a series of actuators like audio, LED matrix and LED strip, or trigger actions like making a call and sending a message.
![enter image description here][4]
From:http://www.seeedstudio.com/wiki/Xadow_Basic_Sensors
[1]: /editor/20160111/56930eeae87ab.png
[2]: /editor/20160111/56930f5f06dae.png
[3]: /editor/20160111/56930f757f8ce.png
[4]: /editor/20160111/56930f865a312.png
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to seeedstudio
Delete
Comment
Are you sure to delete the comment?
Report
Xadow Basic Sensors
No Profile
Announcer: seeedstudio
Creation time: 2016-01-11 02:08:39
Published time:
2021-04-11 19:05:52
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal