BSD
This PCB has been designed for evaluatiuon of the DRV 10970 Brushless Motor Driver with Hall Sensors. The board allows to set configuration inputs to low, high or floating (DAA and CMTMOD) using resistors.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | DRV10970 | U1 | TSSOP24 | 1 |
| 2 | 0.1uF | C1,C5 | 0805 | 2 |
| 3 | 1uF | C2 | 0805 | 1 |
| 4 | 2.2uF | C4 | 0805 | 1 |
| 5 | 10uF | C3 | 0805 | 1 |
| 6 | Solder Pin | JP1,JP2,JP3,JP4,JP5,JP6,JP8,JP9,JP12,JP13 | SOLDERPIN | 10 |
| 7 | LED-Blue(0603) | LED1 | LED-0603 | 1 |
| 8 | Micro JST 6-Pin Male PCB Connector 1.25mm | JP7 | 1X06-1.25MM_JST | 1 |
| 9 | Micro JST 5-Pin Male PCB Connector 1.25mm | JP10 | 1X05-1.25MM_JST | 1 |
| 10 | Micro JST 3-Pin Male PCB Connector 1.25mm | JP11 | 1X03-1.25MM_JST | 1 |
| 11 | 24k | R1 | 0603 | 1 |
| 12 | 10k | R2,R3,R4,R6,R7,R8,R9,R10,R11,R12,R13 | 0603 | 11 |
| 13 | 3.3k | R5 | 0603 | 1 |
Comments (0)