© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Reflow Hot Plate PCB
License: CC-BY 3.0
Mode: Editors' pick
Cloned from Reflow Hot Plate
Features
- Use ESP32 as a micro controller.
- MAX6675 k-type thermocouple for temperature sensor.
- ESP32 output PWM to SSR for heater control.
- ESP32 use PID control.
- WiFi Button: Short pressed for switch WiFi on/off. Long pressed for reset WiFi AP.
- If WiFi is on, ESP32 can publish temperature and PWM Duty Ratio by MQTT.
ESP32 Source code: https://github.com/samuelchiang/ESP32_Reflow_Controller/
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | SSR | AC,SSR | CONN-TH_2P-P5.00 | 2 |
2 | BUZZER | BUZZER | BUZZER-12MM-NS-KIT | 1 |
3 | 100nF | C1 | C0603 | 1 |
4 | ESP32 | ESP32 | ESP32 | 1 |
5 | MAX6675ISA+T | ET | SOIC-8_150MIL | 1 |
6 | HLK-PM01 | HLK-PM01 | PWRM-TH_HLK-PM01 | 1 |
7 | K-TERMOCOUPLE | K-TYPE | WJ55C-B-10.0-2P-14-00A | 1 |
8 | SSD1306 | SSD1306 | SSD1306 | 1 |
9 | K4-12×12_TH | START,WIFI | KEY-TH_4P-L12.0-W12.0-P5.00-LS12.5 | 2 |
Unfold
Loading...
Do you need to add this project to the album?