© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD test
Mode: Editors' pick
test_schematic
Open in Editorproject_p13
Open in Editortest_project
Open in Editortest_project_2
Open in Editortest_project_3
Open in Editortest_project_4
Open in EditorOIT12_kluis
Open in Editormoodlight
Open in Editorcamera slider
Open in EditorID | Designator | Footprint | Quantity |
---|---|---|---|
1 | U1 | TDA2050 (work in progress) | 1 |
2 | U1,U3,U6,U9 | DIP08 | 4 |
3 | U2 | NONE | 1 |
4 | X1 | 3 Pin Breakout Header | 1 |
5 | D1 | LED3MM | 1 |
6 | R7 | R3 | 1 |
7 | C2 | C1 | 1 |
8 | R1 | R3 | 1 |
9 | C1 | C1 | 1 |
10 | R3 | R3 | 1 |
11 | R10 | TRIM_POT_PTH | 1 |
12 | U8 | QFN-20 | 1 |
13 | R6 | R3 | 1 |
14 | R2 | TRIM_POT_PTH | 1 |
15 | U4 | TDA2050 (work in progress) | 1 |
16 | U1 | ARDUINO_NANO | 1 |
17 | R3,R7 | RES-ADJ_3386P | 2 |
18 | R4 | AXIAL-0.3 | 1 |
19 | SW1,SW2 | SWITCH-6X6X5_TH | 2 |
20 | U2 | NONE | 1 |
21 | LED1 | LED-3MM/2.54 | 1 |
22 | LED2 | LED-3MM/2.54 | 1 |
23 | R1,R2,R3,R4 | AXIAL-0.3 | 4 |
24 | LED1 | LED-3MM/2.54 | 1 |
25 | U2 | 3W RGB LED | 1 |
26 | R5,R6 | AXIAL-0.3 | 2 |
27 | P1 | HDR1X5 | 1 |
28 | P2 | 0.96 OLED IIC | 1 |
29 | U2 | A4988 Stepper Motor Driver Carrier | 1 |
30 | L1,L2 | AXIAL-0.4 | 2 |
31 | R1 | AXIAL-0.3 | 1 |
32 | SW1 | SWITCH-6X6X5_TH | 1 |
Unfold
Loading...
Do you need to add this project to the album?