Replacement print for led candle. Once programmed, the attiny will flicker the led and power off the candle after a while (example 5, 10 or 15 minutes). In this way you can use the candle for some effects like crib, or night decoration. With 230mAh, this means 45 days. The ATTiny code can be downloaded on [GitHub.com][1]. **I have still some unanswered questions:** 1. Where can I buy a simple candle case, without electronics inside? Technical information: - Circuit will consume less than 10mA when powered on, ~10nA when powered off - Battery has 230mAh, this means 23 hours or 138 times (if the led will flicker for 10 minutes) - The dip switch is not necessary, you can bridge the ground directly to the pin if you want [1]: https://github.com/Adrianotiger/ledcandle