Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
1、Module description:
The BT-HC05-V1.0 module is a high performance Bluetooth serial port module.
1 can be used for a variety of Bluetooth enabled computers, Bluetooth hosts, mobile phones, PDA, PSP and other smart terminal pairing.
2 wide range of baud rate 4800~1382400, and the module is compatible with single chip microcomputer system.
3 when the master slave mode two Bluetooth module after the success, you can simply change to the wireless Bluetooth, so that your equipment or products more advanced, more fashionable.
4 you can easily use the available Bluetooth mobile phone software, etc..
Master slave 5V/3.3V to replace the previous serial wire communication application control car, home appliances
2、Function Description:
Bluetooth 2.0 with EDR, 2Mbps-3Mbps modulation o built-in 2.4 GHz antenna, users do not need to debug antenna o external 8Mbit flash o low voltage 3.3V
Optional PIO control
Standard HCI port (or USB UART)
USB protocol: Full Speed USB1.1, Compliant With 2 O module can be used as SMD chip technology
RoHS process O pin half hole process
Digital 2.4GHz wireless transceiver
BC04 CSR Bluetooth chip technology afh
Small size (27mm * 13mm * 2mm)
Simple peripheral circuit
Bluetooth Class 2 power level
Storage temperature: -40 to +85 degrees, working temperature: -25 to +75 degree
Co wave interference: 2.4MHz, transmit power 3 dBm
Bit error rate: 0, but it will produce signal decay in the transmission link, only the error, such as RS232 and TTL line processing line
3、Description of each function module:
![enter image description here][1]
4、Components and PCB diagram before welding:
![enter image description here][2]
5、Physical map after welding:
![enter image description here][3]
![enter image description here][4]
![enter image description here][5]
[1]: /editor/20160606/575518c14c24f.png
[2]: /editor/20160606/575518d290dff.jpg
[3]: /editor/20160606/575518e952721.jpg
[4]: /editor/20160606/575518f1656f3.jpg
[5]: /editor/20160606/575518f9c62c6.jpg
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to tulasikrishna
Delete
Comment
Are you sure to delete the comment?
Report
Blue Tooth copy
No Profile
Announcer: tulasikrishna
Creation time: 2018-12-21 15:24:05
Published time:
2018-12-21 15:24:07
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal