Editor Version ×
Standard

1.Easy to use and quick to get started

2.The process supports design scales of 300 devices or 1000 pads

3.Supports simple circuit simulation

4.For students, teachers, creators

Profession

1.Brand new interactions and interfaces

2.Smooth support for design sizes of over 5,000 devices or 10,000 pads

3.More rigorous design constraints, more standardized processes

4.For enterprises, more professional users

Ongoing

STD ESP8266-12F modular copy

License:

Mode: Editors' pick

Cloned from ESP8266-12F modular

  • 539
  • 0
  • 1
Update time: 2021-09-06 09:14:26
Creation time: 2018-12-24 07:17:14
Description
1、ESP8266-12F features : 802.11 b/g/n Built in L106 Tensilica ultra low power 32 bit micro MCU, clocked at 80 MHz and 160 MHz, support RTOS Built in 10 bit high precision ADC Built in TCP/IP protocol stack Built in TR switch, balun, LNA, power amplifier and matching network Built in PLL, voltage regulator and power management module, the output power of dBm 802.11b under +20 mode The polymerization of A-MPDU and A-MSDU and the protective interval of 0.4 s WiFi @ 2.4 GHz, supports WPA/WPA2 security mode Support AT remote upgrade and cloud OTA upgrade Support STA/AP/STA+AP working mode Support Config Smart features (including Android and iOS devices) HSPI, UART, I2C, I2S, Remote, Control, IR, PWM, GPIO Depth sleep holding current is 10 uA and the off current is less than 5 uA Wake up, connect and transfer data packets within 2 ms. Standby power consumption is less than 1 mW (DTIM3) Working temperature range: -40 degrees C - 125 2、Module description: ESP-12F WiFi module is by Shun science and technology development, the core processor module ESP8266 integrated in small size package,The industry's leading L106 Tensilica ultra low power consumption of 32 micro MCU, with 16 bit streamlined mode, the main frequency of 80 MHz and support160 MHz, support RTOS, integrated MAC/ BB/RF/PA/LNA Wi-Fi, onboard antenna. The module supports the standard b/g/n IEEE802.11 protocol, the complete TCP/IP protocol stack. Users can use this module for existing. The device to add networking capabilities, can also be constructed independent of the network controller. 3、Description of each function module: ![enter image description here][1] 4、Components and PCB diagram before welding: ![enter image description here][2] 5、Physical map after welding: ![enter image description here][3] ![enter image description here][4] ![enter image description here][5] [1]: /editor/20160606/57550c652a015.png [2]: /editor/20160606/57550c76cdb4d.jpg [3]: /editor/20160606/57550c8accbfc.jpg [4]: /editor/20160606/57550c9271b8b.jpg [5]: /editor/20160606/57550c9974e9b.jpg
Design Drawing
schematic diagram
1 /
PCB
1 /
The preview image was not generated, please save it again in the editor.
ID Name Designator Footprint Quantity
1 ESP8266-12F/ESP-12F U1 LGA22-2.0-24X16MM 1
2 1k R1,R2 3-0603 2
3 SIP2 P1 HDR1X2 1
4 SIP3 P2 HDR1X3 1
5 MP20045DN U2 MP-SOIC-8 1
6 2.2uf C1,C2 C-0603 2
7 12k R3 3-0603 1
8 10k R4 3-0603 1
9 100pF C3 C-0603 1
10 510R R6 3-0603 1
11 LED D1 L-0603 1
12 POWER-5V U3 3.81-2P 1
13 SIP4 P3 HDR1X4 1

Unfold

Project Attachments
Empty
Project Members
Related Projects
Change a batch
Loading...
Add to album ×

Loading...

reminder ×

Do you need to add this project to the album?

服务时间

周一至周五 9:00~18:00
  • 0755 - 2382 4495
  • 153 6159 2675

服务时间

周一至周五 9:00~18:00
  • 立创EDA微信号

    easyeda

  • QQ交流群

    664186054

  • 立创EDA公众号

    lceda-cn