© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Double Blinking LED
Mode: Editors' pick
void setup() {
pinMode(13, OUTPUT); // set pin 13 as output
pinMode(12, OUTPUT); // set pin 12 as output
}
void loop() {
digitalWrite(13, HIGH); // set pin 13 as high or 1
digitalWrite(12, LOW); // set pin 12 as low or 0
delay(1000); // wait 1000 ms
digitalWrite(12, HIGH); // set pin 13 as high or 1
digitalWrite(13, LOW); // set pin 12 as low or 0
delay(1000); // wait 1000 ms
}
**easyeda schematic**
*open it in the easyeda editer*[ Double Blinking LED esyeda Project][2]
[1]: http://easyeda.com
[2]: https://easyeda.com/editor#id=PTN4YgysK%7C1kwEM8u31ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | LED | D1,D2 | LED3MM | 2 |
2 | 1k | R1,R2 | R3 | 2 |
Unfold
Loading...
Do you need to add this project to the album?