\# NervousSuperMother Current version :1.1 This work is inspired (a lot) by [https://github.com/ghostintranslation](https://github.com/ghostintranslation) work on his motherboards. Thanks for that great inspiring work ! Platform built around Teensy 3.5/3.6 and adapted for 4.1 with DaddyBoard addon PCB. It is mainly a development platform using almost all the ports on Teensy. \# ModularGrid : [https://www.modulargrid.net/e/other-unknown-nervoussupersynth](https://www.modulargrid.net/e/other-unknown-nervoussupersynth) ) ) ) ) ) \# I/O \- 2 trigger/gate input \- 4 CV input \- MIDI IN \- SGTL5000 input \- SGTL5000 output with analog volume control \- PT8211 DAC stereo output \- LED screen 20x2 with contrast control \# Analog controls \- 10 sliders \- 5 potentiometers \- 3 switches \# Digital controls \- 2 encoders with pushbutton \# Hardware controls \- RESET \- PROGRAM \# Driver [https://github.com/nervousapps/NervousSuperMother/tree/withdaddy](https://github.com/nervousapps/NervousSuperMother/tree/withdaddy) \# Firmware There are several firmwares for this motherboard: \- NervousSuperSynth \([https://github.com/nervousapps/NervousSuperSynth/tree/common_base](https://github.com/nervousapps/NervousSuperSynth/tree/common_base)) \- MicroDexed \([https://codeberg.org/nervousapps/MicroDexed/src/branch/nervoussupermother](https://codeberg.org/nervousapps/MicroDexed/src/branch/nervoussupermother)) \# Compilation PlatformIO or Teensyduino \# SCHEMATICS & PCB NervousSuperMother : [https://oshwlab.com/xtreemechille/supersynth-copy](https://oshwlab.com/xtreemechille/supersynth-copy) SuperDaddyBoard : [https://oshwlab.com/xtreemechille/supersynth-copy_copy](https://oshwlab.com/xtreemechille/supersynth-copy_copy) SMD and TH parts, one PCB. I have some PCBs in stock, assembled, kit or bare, contact me at [nervousrvoltage@icloud.com](mailto:nervousrvoltage@icloud.com) if you are interested. \# HARDWARE FIX \- One slider is not connected \# BOM [https://docs\.google\.com/spreadsheets/d/1\-4hl6AcAoJYJrRvISyrwIaEGTYHwAB\_IcKs\_\_rtEGYY/edit?usp=sharing](https://docs.google.com/spreadsheets/d/1-4hl6AcAoJYJrRvISyrwIaEGTYHwAB_IcKs__rtEGYY/edit?usp=sharing) \# PANEL [https://cad.onshape.com/documents/76309e780cb99c0f2066b519/w/a28c1d39745cdb4e42b1148c/e/933dfecdfdc7ae9463372842](https://cad.onshape.com/documents/76309e780cb99c0f2066b519/w/a28c1d39745cdb4e42b1148c/e/933dfecdfdc7ae9463372842) I made the panel here : [https://www.john-steel.com/](https://www.john-steel.com/) \# TODO \- clean code \- separate switch and potentiometers from sliders