© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Opensource Linear Actuator Controller (Calculated for Concens 35)
Mode: Editors' pick
Hall sensor Schematic
Open in EditorMotor driver Schematic
Open in EditorPower Supply Circuit
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | Magnet sensor | HALL_11,HALL_12 | C0402 | 2 |
2 | 10k | R1,R2,R3I,R3H,R5,R110,R120 | R3 | 7 |
3 | MCT62 | OPTO1 | S08 | 1 |
4 | IC_ULN2003A | TR1 | TSSOP-16 | 1 |
5 | Brush Motor 24Vdc 1.8A | M1 | HDR1X2 | 1 |
6 | IRF530PBF | Q1 | Seeed-TO-220 | 1 |
7 | 330 | R4 | R3 | 1 |
8 | 4N5822? | D1 | SOT23 | 1 |
9 | 0.22ohm 5W | R? | R3 | 1 |
10 | LM358P | OP1B,OP1A | DIP08-KIT | 2 |
11 | RELAY | RL1,RL2 | RELAY-JZC | 2 |
12 | 1k | R6 | R3 | 1 |
13 | 4k7/10k | R7 | R3 | 1 |
14 | 2.2uF | CC1? | CP_8X13MM | 1 |
15 | 100uF 50V | CE1 | CP_8X13MM | 1 |
16 | 100nF | C3,C2,C1 | 1206 | 3 |
17 | 1N4001 | D2 | DO35-7 | 1 |
18 | LM7805CT | RE1 | HDR1X3 | 1 |
19 | LM7812CT | U1 | TO-220 | 1 |
Unfold
Loading...
Do you need to add this project to the album?