© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD DrillController
License: Public Domain
Mode: Editors' pick
This project is meant to regulate the RPM of my drill which is mounted as a drill-press.
For better performance on low RPM a magned and a hall-effect sensor were placed on the motor spindle inside the drill and not on the output shaft.
The hall-effect sensor enables arduino to count RPM which are then fed into a PID formula and converted to actual number for phase-shift controll circuitry.
NOTE: other then what you see on the diagram you will need a 5v power supply for the circuit.
The GyverTimers library is taken from alexgyver.ru.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ARDUINO-MINI | U1 | ARDUINO_MINI | 1 |
2 | HDR-F-2.54_1x2 | H1,H2 | HDR-F-2.54_1X2 | 2 |
3 | 220 | R1,R5 | R_AXIAL-0.3 | 2 |
4 | 1k | R2 | R_AXIAL-0.3 | 1 |
5 | 10k | R3 | R_AXIAL-0.3 | 1 |
6 | 100k | R4 | R_AXIAL-0.3 | 1 |
7 | EH 3144 | U4 | TO-92S-F | 1 |
8 | 10nF | C1 | C0603 | 1 |
9 | BTA216B-800B | Q1 | SOT404 | 1 |
10 | PC817C-CU-DH | U3 | DIP-4_L4.6-W6.5-P2.54-LS7.6-BL | 1 |
11 | MOC3023M_C433451 | U2 | DIP-6_L7.1-W6.5-P2.54-LS7.6-BL | 1 |
12 | MB6S | D1 | MBS_L4.7-W4.0-P2.50-LS7.0-TL | 1 |
13 | 0.1u | C2 | C0402 | 1 |
14 | R_3386P_EU | RP1 | RES-ADJ-TH_3386P | 1 |
Unfold
Loading...
Do you need to add this project to the album?