© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD ESP01 UART splitter and more
License: Public Domain
Mode: Editors' pick
Board as an intermediate link between ESOP-01 and the device. It can be used to monitor both UARTs and program the ESP-01.
It allows monitoring of both UARTs (Serial or Serial1), the selection of the UART is done by jumper J2.
No buttons need to be pressed for programming if programming from the Ardino IDE. For this it uses the RTS and DTR signals.
It has not yet been implemented or tested.
PCB_ESP01 UART splitter and programer
Open in EditorPCB_ESP01 UART splitter and more
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 1u | C1 | CASE-B_3528 | 1 |
2 | 1000u | C2 | CAP-D10.0×F5.0 | 1 |
3 | 0.1u | C3 | RAD-0.1 | 1 |
4 | HDR-F-2.54_2x4 | H1 | HDR-F-2.54_2X4 | 1 |
5 | HDR-F-2.54_1x6 | H2 | HDR-F-2.54_1X6 | 1 |
6 | HDR-M-2.54_2x4 | J1 | HDR-M-2.54_2X4 | 1 |
7 | HDR-M-2.54_1x3 | J2 | HDR-M-2.54_1X3 | 1 |
8 | HDR-M-2.54_1x2 | J3 | HDR-M-2.54_1X2 | 1 |
9 | 2N3904(TO-92) | Q1,Q2 | TO-92-3_L5.1-W4.1-P1.27-L | 2 |
10 | 22k | R1,R4 | R_AXIAL-0.3 | 2 |
11 | 12k | R2,R3 | R_AXIAL-0.3 | 2 |
12 | K4-6×6_TH | RESET | KEY-TH_4P-L6.0-W6.0-P4.50-LS6.5 | 1 |
Unfold
Loading...
Do you need to add this project to the album?