© 2023 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD FCG4
License: MIT
Mode: Editors' pick
Flight Controler based on STM32G441KBT6. Designed for fpv drones with 20x20mm stacks. As the MPU, the ICM-20602 has been selected. FC supports analogue receivers (CPPM). The flight controller can be powered from 2S Lipo. There is no built-in chip for OSD, but the corresponding uart pins were brought out to hook up external osd hardware like MinimOSD.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | Switch3x4x2 | BOOT0,NRST | SW-SMD_L4.0-W2.9-LS5.0 | 2 |
2 | 100nF | C1,C2,C3,C5,C7,C9 | C0603 | 6 |
3 | 1uF | C4,C12,C13 | C0603 | 3 |
4 | 2.2uF | C6 | C0603 | 1 |
5 | 10nF | C8 | C0603 | 1 |
6 | 0603 | LED1 | LED0603_RED | 1 |
7 | 47R | R1 | R0603 | 1 |
8 | 10k | R4 | R0603 | 1 |
9 | STM32G441KBT6 | U1 | LQFP-32_L7.0-W7.0-P0.80-LS9.0-BL | 1 |
10 | ICM-20602 | U3 | LGA-16_L3.0-W3.0-P0.50-BL | 1 |
11 | LDO-TS9011-3V3 | U4 | SOT23 | 1 |
Unfold
Loading...
Do you need to add this project to the album?