© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD WordClock 11x10 Panel
License: MIT
Mode: Editors' pick
Cloned from WordClock Panel
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 100n | CL24,CL27,CL25,CL26,CL29,CL28,CL30,CL32,CL31,CL23,CL35,CL37,CL36,CL33,CL34,CL22,CL38,CL40,CL39,CL42,CL43,CL41,C1,C4,C8,C6,C2,CL19,CL21,CL20,CL17,CL18,CL16,CL0,CL12,CL11,CL14,CL15,CL13,CL1,CL9,CL10,CL8,CL6,CL7,CL4,CL3,CL5,CL2,CM4,CM3,CM2,CM1 | C0805 | 53 |
2 | 5V | P10,P14,P19,P20,P15,P18,P5,P3,P4 | PCB INTERCONNECT PAD | 9 |
3 | GND | P11,P13,P16,P21,P22,P23,P8,P7,P6 | PCB INTERCONNECT PAD | 9 |
4 | DOut | P12,P9 | PCB INTERCONNECT PAD | 2 |
5 | DIn | P17 | PCB INTERCONNECT PAD | 1 |
6 | WS2812B | LED22,LED23,LED24,LED25,LED26,LED27,LED28,LED29,LED30,LED31,LED32,LED43,LED42,LED41,LED40,LED39,LED38,LED37,LED36,LED35,LED34,LED33,LED11,LED12,LED13,LED14,LED15,LED16,LED17,LED18,LED19,LED20,LED21,LED10,LED9,LED8,LED7,LED6,LED5,LED4,LED3,LED2,LED1,LED0,LEDM1,LEDM2,LEDM3,LEDM4 | LED-5050_4P | 48 |
7 | 4k7 | R8 | R0805 | 1 |
8 | 10k | R10,R9,R1,R2,R5,R4,R6,R7 | R0805 | 8 |
9 | 4u7 | C3 | C0805 | 1 |
10 | 10u | C5,C7 | C1206 | 2 |
11 | Micro USB SMD Male Connector | USB1 | MICRO USB SMD MALE CONNECTOR | 1 |
12 | ESP8266 12F | U2 | ESP8266 12F MODULE WITHOUT PIN 19-14 | 1 |
13 | 220k | R3 | R0805 | 1 |
14 | AMS1117-3.3 | U3 | SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | 1 |
15 | Microwave Radar Sensor RCWL-0516 | M1 | MICROWAVE RADAR SENSOR RCWL-0516 | 1 |
16 | LDR | P1 | PROTOPIN 1 NO SILK | 1 |
17 | Header-Male-2.54_1x1 | P2 | PROTOPIN 1 NO SILK | 1 |
18 | CP2102-GMR | U1 | QFN-28_5X5X05P | 1 |
19 | S8050-J3Y | Q2,Q1 | SOT-23 323 | 2 |
Unfold
Loading...
Do you need to add this project to the album?