© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Lithium-ion Batteries 18650 Charge
Mode: Editors' pick
- 0
Update time：
2021-10-29 14:17:39
Creation time：
2020-02-16 02:08:20
Description
Empty
Design Drawing
schematic diagram
（
1
/
）
-
18650 Charge_V2
Open in Editor -
18650 Charge_V1
Open in Editor -
Li-Ion Battery Capacity Tester copy copy copy
Open in Editor
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | SSD1306 | U8,U4 | SSD1306_ARDUINO | 2 |
| 2 | 0.1R 1% | R49,R25 | AXIAL-0.4 | 2 |
| 3 | LM2576SX-ADJ | U7,U10,U2,U5 | TO-263-5 | 4 |
| 4 | 1k | R18,R26,R7,R20 | AXIAL-0.3 | 4 |
| 5 | 330R | R8,R12,R5,R16 | AXIAL-0.3 | 4 |
| 6 | 4K7 | R24,R10,R28,R29 | AXIAL-0.3 | 4 |
| 7 | 10k | R21,R22,R17,R23,R13,R14 | AXIAL-0.3 | 6 |
| 8 | 220u | C4,C7,C1,C3 | CAP-D3.0XF1.5 | 4 |
| 9 | 1000u | C5,C6 | CAP-D3.0XF1.5 | 2 |
| 10 | IRFZ44N | Q5 | TO-220(TO-220-3) | 1 |
| 11 | 20k | R19,R27 | RES-ADJ_3386P | 2 |
| 12 | 10k | R9,R11,R30,R6,R15 | RES-ADJ_3386P | 5 |
| 13 | 470u / 35v | C25,C8 | CAP-D3.0XF1.5 | 2 |
| 14 | 10u | C31 | CAP-D3.0XF1.5 | 1 |
| 15 | non | SW2,SW3,SW4 | KEY-6.0*6.0-4 | 3 |
| 16 | SET Charge Voltage | SW1 | KEY-6.0*6.0-4 | 1 |
| 17 | 150uH | L3,L4,L1,L2 | AXIAL-0.4 | 4 |
| 18 | MCP4725A0T-E/CH | U18 | SOT-23-6 | 1 |
| 19 | ARDUINO_PRO_MINI | U9,U3 | ARDUINO_PRO_MINI | 2 |
| 20 | 104 | C30 | RAD-0.1 | 1 |
| 21 | TIP122 | Q4,Q3 | TO-220(TO-220-3) | 2 |
| 22 | DC005-2.0MM | DC2 | DC-5020 | 1 |
| 23 | 18650 x 1 | B2,B3 | BAT-TH_BS-2-1 | 2 |
| 24 | 1N5822 | D4,D3,D1,D2 | SOD-123 | 4 |
| 25 | LM358AP | U13 | DIP-8_LS7.6-L9.7-W6.4-P2.54-BL | 1 |
| 26 | LM358PSR | U16,U12,U6,U11 | SOIC-8_208MIL | 4 |
| 27 | A Meter | P4 | HDR-1X2/2.54 | 1 |
| 28 | 1R / 5W | R1 | AXIAL-0.3 | 1 |
| 29 | 2R / 5 W | R4 | AXIAL-0.3 | 1 |
| 30 | 4k7 | R2,R3 | AXIAL-0.3 | 2 |
| 31 | 1000u /35V | C2 | CAP-D3.0XF1.5 | 1 |
| 32 | 2N3904 | Q1,Q2 | TO-92(TO-92-3) | 2 |
| 33 | GND | P3 | HDR-1X1/2.54 | 1 |
| 34 | 4V4 | P1 | HDR-1X1/2.54 | 1 |
| 35 | DC 12V / 3A | DC1 | DC-5020 | 1 |
| 36 | LM317 | U1 | TO-220 | 1 |
| 37 | SRD-12VDC-SL-C | RELAY1,RELAY2 | RELAY-SL-SRD | 2 |
| 38 | 18650 x 1 | B1 | BATTERY-1 | 1 |
| 39 | 5KΩ | PR1 | RES-ADJ_3362P | 1 |
| 40 | BATTERY | BAT1,BAT2 | BATTERY-AA | 2 |
| 41 | reset | KEY1 | KEY-4.5X4.5 | 1 |
| 42 | Charge | LED1,LED3 | 0805 | 2 |
| 43 | Stdby | LED2,LED4 | 0805 | 2 |
| 44 | IRF540 | Q7,Q10,Q1 | TO-220AB | 3 |
| 45 | BC547 | Q8,Q11,Q2 | TO-92_MOLDED_NARROW | 3 |
| 46 | PNP | Q9,Q12,Q3 | NONE | 3 |
| 47 | 10uF | C9,C8 | 0805 | 2 |
| 48 | 1KΩ | R31,R2,R9,R18,R25,R30 | AXIAL-0.3 | 6 |
| 49 | arduino micro | U1 | ARDUINO PRO MICRO | 1 |
| 50 | LM317 | U2 | NONE | 1 |
| 51 | 560Ω | R1 | AXIAL-0.3 | 1 |
| 52 | 100uF | C1,C3,C4,C5,C6 | CAP-D8.0XF3.5 | 5 |
| 53 | 100nF | C2 | RAD-0.2 | 1 |
| 54 | ALARM | B1 | B-12*9.5 | 1 |
| 55 | 10KΩ | R3,R5,R6,R7,R8,R19,R21,R22,R23,R24,R29,R15 | AXIAL-0.3 | 12 |
| 56 | 8.4Ω10W | R4,R20 | AXIAL-0.3 | 2 |
| 57 | 1.3 OLED | P1 | SSD1306 | 1 |
| 58 | DC12V/ 3A IN | DC1 | DC-5020 | 1 |
| 59 | LM2576 | U3 | BOITIER PENTAWATT | 1 |
| 60 | 470uF | C7 | CAP-D8.0XF3.5 | 1 |
| 61 | SCHOTTKY | D1 | SCHOTTKY IN5822 | 1 |
| 62 | 150uH | L1 | PM2120-151K-RC INDUCTOR 5.5A 43MOHM (SMT) CUSTOM | 1 |
| 63 | 11KΩ | R10 | AXIAL-0.4 | 1 |
| 64 | 3.6KΩ | R11 | AXIAL-0.4 | 1 |
| 65 | TP4056 | U4,U5 | SOP-8_EP_150MIL | 2 |
| 66 | 1KΩ | R12,R13,R26,R27 | 0805 | 4 |
| 67 | 1.2KΩ | R14,R28 | 0805 | 2 |
| 68 | R1J/4W | R16,R17 | AXIAL-0.3 | 2 |
Unfold
Project Members
0
0
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?