© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD 3s_Li-Ion_Voltage_Indicator_v1
License: Public Domain
Mode: Editors' pick
3s Li-Ion Battery Voltage Indicator
Based on LM3914N LED indicator IC
This project is using 5 LEDs instead of full 10pcs. Once you have calibrated the resistance value with a potentiometer, then you can remove it, measure it and place the measured resistance into "R_FIXED" axial resistor pads.
The PCB is fitted with 375mA fuse in case something becomes shorted. Also switch can be placed to the terminal block to take a measurement when you have connected this PCB to a battery with 2-pin JST connector.
REVISION: 1.0
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 10uF | C10 | CAP-TH_BD5.0-P2.00-D0.8-FD | 1 |
2 | 22K | R1 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
3 | 330nF | C2 | CAP-TH-P5.08 | 1 |
4 | 333-2UYD/S530-A3 | LED2,LED3 | LED-TH_BD5.0-P2.54-FD | 2 |
5 | 1N4007B | D1 | DO-41_BD2.4-L4.7-P8.70-D0.9-FD | 1 |
6 | TJ-L5FYTGHRMFCSFLC2R-A5 | LED1 | LED-TH_BD5.8-P2.54-FD | 1 |
7 | 3.9K | R2 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
8 | 10 | R3 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
9 | 375mA | F1 | FUSE-TH_BD3.0-L7.2-P11.20-D0.6 | 1 |
10 | 18K | R5 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
11 | TJ-L5FYTGHKMCGLFLC7K-A5 | LED4,LED5 | LED-TH_BD5.8-P2.54-FD | 2 |
12 | 1K | R4 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
13 | 1K | POT | RES-ADJ-TH_3362P | 1 |
14 | 100nF | C1 | CAP-TH-P2.54 | 1 |
15 | PH-2AW RHOS | POWER | CONN-TH_2P-P2.00_PH-2AW | 1 |
16 | LM3914N | U1 | DIP-18_L23.0-W6.5-P2.54-LS7.6-BL | 1 |
17 | CONN-TH_2P-P5.08 | SWITCH | CONN-TH_2P-P5.08 | 1 |
18 | 1.3K | R6 | RES-TH_BD2.2-L6.5-P10.50-D0.6 | 1 |
19 | R | R_FIXED | R_AXIAL-0.4 | 1 |
Unfold
Loading...
Do you need to add this project to the album?