© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Pro Micro Breakout (Arcade)
License: MIT
Mode: Editors' pick
A generic Arduino Pro Micro breakout board for projects such as an arcade joystick controller based on the open source DaemonBite Arcade software (https://github.com/MickGyver/DaemonBite-Arcade-Encoder). Pins for the arcade buttons and stick are labelled on the front of the board. Generic pin names labelled on the back of the board.
Only the arcade buttons that are used are broken out. D5/D7 are broken out to a header below the Pro Micro along with the VCC, GND, and RAW pins for convenience. There is also a 6mm tack switch option to make it easier to double tap reset when programming the Pro Micro device.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | JT1230 | SW1 | SW-TH_4P-L6.0-W6.0-P4.50-LS6.5 | 1 |
2 | pro micro | U1 | PRO MICRO | 1 |
3 | HDR-M-2.54_1x5 | J1 | HDR-M-2.54_1X5 | 1 |
4 | B4_B3 | P1 | CONN-TH_2P-P5.08 | 1 |
5 | GND_B2 | P2 | CONN-TH_2P-P5.08 | 1 |
6 | B1_B5 | P3 | CONN-TH_2P-P5.08 | 1 |
7 | B12_B9 | P4 | CONN-TH_2P-P5.08 | 1 |
8 | B10_B11 | P5 | CONN-TH_2P-P5.08 | 1 |
9 | RIGHT_LEFT | P6 | CONN-TH_2P-P5.08 | 1 |
10 | DOWN_UP | P7 | CONN-TH_2P-P5.08 | 1 |
11 | B6_B8 | P8 | CONN-TH_2P-P5.08 | 1 |
12 | B7_GND | P9 | CONN-TH_2P-P5.08 | 1 |
Unfold
Loading...
Do you need to add this project to the album?