© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD DSPIC30F4011 Development board(done)-Fabricated
Mode: Editors' pick
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 33p | C1,C2 | RAD-0.1 | 2 |
2 | DSPIC30F4011 | U1 | TQFP44 | 1 |
3 | Programming header | P5 | HDR-5X1H/2.54 | 1 |
4 | Oscillator | X1 | OSC-49S-1 | 1 |
5 | 10k | R1 | AXIAL-0.3 | 1 |
6 | MCU Reset | SW1 | SWITCH-6X6X5_TH | 1 |
7 | Power IN | LED1-BLUE | LED-3MM/2.54 | 1 |
8 | 470 Ohm | R2 | AXIAL-0.3 | 1 |
9 | Port B | H1 | HDR-9X1/2.54 | 1 |
10 | Port E | H2 | HDR-9X1/2.54 | 1 |
11 | Port F | H3 | HDR-9X1/2.54 | 1 |
12 | Port C | H4 | HDR-9X1/2.54 | 1 |
13 | DIP Switch 2x | S1,S2 | DIP SWITCHES 2X | 2 |
14 | LD1117AV33 | U2 | TO-220(TO-220-3) | 1 |
15 | RB6 | LED2-BLUE | LED-3MM/2.54 | 1 |
16 | RB7 | LED3-BLUE | LED-3MM/2.54 | 1 |
17 | 470 ohm | R3,R4 | AXIAL-0.3 | 2 |
18 | DC-005 | J1 | DCJ3P-14.2X11.0X9.0MM | 1 |
19 | 47uf | C3 | ELECTCAPA | 1 |
20 | 100uf | C4 | ELECTCAPA | 1 |
21 | VDD SRC | J3 | M1X3 | 1 |
22 | ON/OFF | P1 | 2X3 PUSH SWITCH | 1 |
23 | GND header | J2 | M1X3 | 1 |
24 | VCC 3.3V header | J4 | M1X3 | 1 |
Unfold
Loading...
Do you need to add this project to the album?