Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
The Low-Noise SEPIC-Linear Hybrid Power Supply Module is designed to output up to 30V at 1A for a wide input voltage range of 12-32V. The SEPIC converter stage allows the user to use the full output voltage range even for input voltages lower than the output voltage. Thus, the user can power the power supply module from a 12V battery or standard 12V/15V/18V/24V wall adaptor. The linear regulator output stage ensures low output
noise and fast short circuit response. The SEPIC converter acts as a pre-regulator to the linear
regulator. The circuit is protected from input reverse polarity using an ideal-diode circuit, which uses the IRF4905 P-Channel MOSFET with a low ON resistance of 22mΩ.
The output voltage is fully adjustable between 1V to 30V and the current limit between 0A – 1A. The output voltage can drop to 0V in constant current mode, but not in constant voltage mode.
The output voltage and current are measured by the 16-bit ADS1115 ADC module and the values are sent to the Arduino Uno using I2C Protocol. The Arduino Uno then calculates the power consumed. These values, along with the voltage and current, are displayed using the LCD along with the ON/OFF state of the power supply and CC/CV mode.
![PXL_20210407_042933705.jpg](//image.easyeda.com/pullimage/7FuyhrsGAdtV9AALgp3MX1lzePL3FMPy49wZvUJj.jpeg)
![image.png](//image.easyeda.com/pullimage/lg0xfcYdsAbFHbTmsrL2L545zBSXOys5aMTXpMyn.png)
**Features of the power supply module:**
• Compact and portable
• Low-Noise Output
• Fast short-circuit response (~6us)
• Onboard 5V regulator to power a microcontroller, display
• Compatible with standard wall adaptors rated 12V, 15V, 18V, 20V,24V
• Can output the full 1-30V range at 1A for inputs as low as 11V
• Adjustable output overcurrent protection all the way down to 0A with indication LED
• Enable/Disable PSU with or without microcontroller
• Output ON indication LED
• Input reverse-polarity protection with indication LED
**Features of the data logger & readout:**
• LCD to display voltage, current, power, etc in a convenient layout
• PSU ON/OFF state indication, CC / CV indication
• 16-bit ADC to read output voltage, current
• All Acquired data is saved in Excel
• Resettable data logging
**Applications:**
• Portable/ battery-powered DC power supply module
• Hobbyist's DC power supply module
![image.png](//image.easyeda.com/pullimage/LoJHh3qQ33heWxXtxaI7KLGIDG9ivjaiBF76vMfy.png)
![image.png](//image.easyeda.com/pullimage/H4E5XXi3akECO5ygfrHq7qoxvmXcea65WkQDcGoY.png)
For more details (calculations of the power stage parameters, electronic load design, etc), check out PDF in the attachments section.
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to prathikprashanth
Delete
Comment
Are you sure to delete the comment?
Report
Low-Noise SEPIC-Linear PSU
Power Electronics
Announcer: Prathik Prashanth
Creation time: 2021-03-09 12:08:50
Published time:
2022-02-20 07:36:49
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal