Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
Xadow Duino
License: TAPR Open Hardware License
Mode:Editors' pick
2.4k
0
0
0
Update time:
2021-04-10 23:07:34
Creation time:
2016-01-11 01:59:02
Description
The Xadow Duino is specially designed for building up awesome Lighting Devices using the most popular RGB LED WS2812b. Based on the MCU ATmega32u4 and the built-in micro USB, Xadow Duino allows you to either control the RGB LEDs directly from the software in RePhone Kit Create, or program the board with Arduino IDE to make it work dependently.
![enter image description here][1]
Unlike any other add-on modules, this board also has its own battery socket (JST1.0 type), so you can power it in many ways:
Via 5V USB (if the battery is connected, it would also charge the battery simultaneously )
Via 3.7V Lipo battery
Via breakout pins
Via Xadow GSM+BLE
Include
Xadow Duino* 1
FPC Cable 11 PIN * 2
LED strip * 1
Features:
Able to work like an Arduino
Plug-and-play if connected with RePhone Kit Create
Open source and modular design
Slim and small
Specially designed for WS2812B
Built-in 11PIN Xadow Connectors for full flexible connection with other Xadow Modules
Stackable, chainable and sewable with other Xadow Modules
Perfect choice for LED lovers
Specification:
Microcontroller:
ATmega32u4
Power Supply:
5V via USB, current draw is 1.5A at Max
3.3 – 4.2V via battery socket, current draw is 1.5A
at Max
3.3 – 6V via breakout pins, current draw is 500 mA
at Max
3.3 – 4.2 V via Xadow GSM+BLE, current draw is
500 mA at Max
Charging Current: 500 mA
Flash Memory:
32 KB (ATmega32u4) of which 4 KB used by
bootloader
SRAM: 2.5 KB (ATmega32u4)
EEPROM: 1 KB (ATmega32u4)
Clock Speed: 16 MHz
Connector:
2 x 11 PIN Xadow Connector
Bonding pads for RGB LED WS2812b
Interfaces:
Interface with Xadow GSM+BLE through
I2C (7-bit address 0x23)
Dimension: 25.37mm X 20.30mm / 1’’ X 0.8’’
From:For more detail, please visit: http://www.seeedstudio.com/item_detail.html?p_id=2556
Xadow Duino
The Xadow Duino is specially designed for building up awesome Lighting Devices using the most popular RGB LED WS2812B. Based on the MCU ATmega32u4 and the built-in micro USB, Xadow Duino allows you to either control the RGB LEDs directly from the software in RePhone Kit Create or program the board with Arduino IDE to make it work dependently. Unlike any other add-on modules, this board also has its own battery socket (JST1.0 type), so you can power it in many ways:
Via 5V USB (if the battery is connected, it would also charge the battery simultaneously )
Via 3.7V Lipo battery
Via breakout pins
Via Xadow GSM+BLE
Features
Able to work like an Arduino
Plug-and-play if connected with RePhone Kit Create
Open source and modular design
Slim and small
Specially designed for WS2812B
Built-in 11PIN Xadow Connectors for fully flexible connection with other Xadow Modules
Stackable, chain-able and sew-able with other Xadow Modules
Perfect choice for LED lovers
Specification
Microcontroller ATmega32u4
Power Supply 5V via USB, current draw is 1.5A at Max
3.3 ~ 4.2V via battery socket, current draw is 1.5A at Max
3.3 ~ 6V via breakout pins, current draw is 500 mA at Max
3.3 ~ 4.2 V via Xadow GSM+BLE, current draw is 500 mA at Max
Charging Current 500 mA
Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM 2.5 KB (ATmega32u4)
EEPROM 1 KB (ATmega32u4)
Clock Speed 16 MHz
Connector 2 × 11 PIN Xadow Connector
Bonding pads for RGB LED WS2812b
Interfaces Interface with Xadow GSM+BLE through
I2C (7-bit address 0x23)
Dimensions 25.37mm × 20.30mm / 1”× 0.8”
Hardware Overview
![enter image description here][2]
Light Things Up
Control the WS2812B with your 'RePhone Kit Create
The easiest way to control the WS2812B is to use the built-in software in 'RePhone Kit Create', which provides an 'Actuator Control' application that allows you to light up the WS2812B in three different ways: 1. Monochrome, 2 Marquee, 3. Rainbow
![enter image description here][3]
Set If This Then That
In the ‘If This Then That’ you can set different conditions to trigger the Xadow Duino to light up the WS2812B in a specified mode.
Program it with Arduino IDE
You can also do some coding with the Arduino IDE to customize your light sources. There are many good projects on the internet, wondering how other people DIY cool lighting stuff?
Check it out:
Recipe LEDs2.png
![enter image description here][4]
From:http://www.seeedstudio.com/wiki/Xadow_Duino
[1]: /editor/20160111/56930c9626ad2.png
[2]: /editor/20160111/56930da5b7044.png
[3]: /editor/20160111/56930dba40a56.png
[4]: /editor/20160111/56930dce0f0c5.png
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to seeedstudio
Delete
Comment
Are you sure to delete the comment?
Report
Xadow Duino
No Profile
Announcer: seeedstudio
Creation time: 2016-01-11 01:59:02
Published time:
2021-04-10 23:07:34
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal