© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Nixie Tube Clock
License: CC-BY-NC-SA 3.0
Mode: Editors' pick
- 4
Update time：
2020-12-01 19:47:21
Creation time：
2019-01-15 10:54:46
Description
Cool Nixie Tube Clock, design works out of the box. All parts (execpt for the tubes) can be ordered from LCSC, if you have any questions feel free to contact me via easyeda messages.
It is recommended to put the nixie tubes on special nixie tube pins, these can be found on ebay.
All design files are available from here:
https://1drv.ms/u/s!AtAXShYJCGHGg8cPyZy78OAvaAjYnw?e=Gnd8If
Assembly Instructions:
The top board is mounted to the front panel using 10mm spacers and the bottom board is mounted to the bottom panel also using 10mm spacers. The boards can be programmed by using an ICSP programmer such as the USBASP.
NOTE:unconnected lines between top and bottom board are OK. The PCB is grooved in the middle, which allows the top part to be vertically mounted against the bottom board
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
Unfold
1
4
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?