© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Fan Smoother
License: Public Domain
Mode: Editors' pick
This board impvoes the performance of 3D printer fans that are controlled by PWM power. It converts the PWM power to proportional DC voltage that is more compatible with the requirements of brushless DC fans. It's benefits:
1. Smoother fan operation.
2. Allows to use the fans also at lower PWM percentage range.
3. Allows to operate fans that don't well otherwise with PWM power.
The board has tree indepdenet channels for up to three fans and is intended for 12VDC or 24VDC fans that consume 300ma at most. To take advange of the smoother, sets the PWM frequency of your controller for at least 30Khz and higher if possible, the higher the PWM frequency, the better the filtering is.
This design is based on a circuit suggestion by @dc42 in the Duet forums but is not specific to Duet RepRap controller.
ID | Name | Designator | Footprint | Quantity | BOM_Supplier | BOM_Manufacturer Part | BOM_Manufacturer | BOM_Supplier Part |
---|---|---|---|---|---|---|---|---|
1 | 1uF 50v | C1,C2,C3 | C0805 | 3 | LCSC | CL21B105KBFNNNE | SAMSUNG | C28323 |
2 | B5819W | D1,D2,D3,D4,D5,D6 | SOD-123_L2.7-W1.6-LS3.7-RD-1 | 6 | LCSC | B5819W | CJ | C8598 |
3 | KF2510-2A | J1,J2,J3,J4,J5,J6 | CONN-TH_KF2510-2A-FIXED | 6 | LCSC | KF2510-2A | BOOMELE | C27543 |
4 | 1mH | L1,L2,L3 | IND-SMD_L12.0-W12.0 | 3 | LCSC | YPRH1209-102M | YJYCOIN | C718311 |
5 | FC-2012HRK-620D | LED1,LED2,LED3 | LED0805-RD_RED | 3 | LCSC | FC-2012HRK-620D | NATIONSTAR | C84256 |
6 | 10K | R1,R2,R3 | R0603 | 3 | LCSC | 0603WAF1002T5E | UniOhm | C25804 |
Unfold
Loading...
Do you need to add this project to the album?