Laser Alarm System Trigger V2
By: Tyler Le
This is the second model of the receiving end of a DIY laser-based alarm system. The first one will not be published. Also, this circuit has been tested on a simulator [http://www.falstad.com/circuit/] and it seems to work great.
This alarm will normally have a laser shinin...
•Канал на Ютуб / Channel on Youtube: https://www.youtube.com/channel/UCyVzmkYMe5pQK0HMWgyaE9Q?view_as=subscriber
•Видио на Ютуб / Vidio on Youtube: https://youtu.be/AejZOrpN9Ko
•Схема проекта / Project circuit: https://easyeda.com/romans.dodu/laser_spirograph_2019
•Архив с файлами лазерного спирографа ссылка / Archive with laser spirograph files link: https://drive.google.com/open?id=1GjJvR0MF...
4 steppers direct ESP32 GPIO and 2 via I2S shift register
shift register PWM for 4 mosfet, 4 servo outputs
mixed voltage: two power rails
current and voltage monitor for two power rails and IC power
all parts available through lscs.com
I2C OLED and output for TFT+touch
We need safety and security for our valuable things, to protect our property simple and robust security alarm circuit designed by using commonly available components. We know the LASER (Light Amplification by Stimulated Emission of Radiation) light has high strength-focused light rays, in this project we have used that laser ligh...
This is a device that cuts anything that breaks the laser line. Once the photo resistor (PRA, PRB) detects no laser (LD+, LD-) , the motors (M1A, M1B, M2A, M2B) will start to spin. The motor shafts are connected to sharp blades that cuts. C2 is normally charged, when the device is triggered, C2 will discharge through the electromagnet 1 (EM1A, EM1B). The electromagnet 1 will release a sharp metal...