Этот проект MQTT-ModBusRTU шлюза на ESP8266 на базе разработки ESPEasy.
Стоит попробовать прошивку отсюда https://github.com/pvvx/esp8266web
This is a battery powered sensor board based on the ESP8266 (ESP-12F).
By using a TPL5111 chip the battery consumption can be reduced to about 1µA when the ESP is not enabled. When the TPL5111 chip receives 5V at it's wake up pin this will turn the ESP on by enabling the 3.3V voltage regulator. At this moment you can run any program you want. If you want to turn the ESP off again you have to drive...
This PCB is designed to be a flexible way of building wireless modulair sensor and switching devices capable of sending and receiving data over various protocols. The heart of this PCB is the amazing ESP wifi chip.
This board gives you access to most of its GPIO pins, as well as the I2C protocol and the ADC. It's possible to program the ESP while it is soldered to the board.
While it is possible...