HAT or pHAT for Raspberry Pi. Designed with the Pi Zero W in mind, so it shares the footprint of the Zero.
HAT has an ATmega328PB connected via I2C, SPI and UART,allowing both flashing, and many forms of communication.
Included a space for a Mini DC-DC voltage regulator. These are good for 3A of power, but make sure to solder the 5V pads and cut the ADJ pad lead.
Headers for SPI(ICSP) and both...
On reciept of the board and test build I found that I got SCL and SDA on the eeprom mixed up. This means that data can not be written or read with the ISC2 EEPROM. I need to do further testing before updating the design.
This is a Parallax Propeller P8X32A based Mechatronics module V2.1B
The P8X32A is a swiss army knife of microcontrollers with 8 cores (each with dedicated PLLs and counte...