Shield for blue-pill compatible boards.
Allows to connect a second blue-pill as ST-LINK.
May use with blue-pill compatible boards on stm32f401 or stm32f411 (black-pill). For example see https://msalamon.pl/pogromca-bluepill-nadchodzi-nowe-czyli-blackpill-z-stm32f4/
## ETHERNET INTERFACE BRICK AND SHIELD ##
Your Ethernet Shield gets a total renewal now! This shield provides you instant Internet connectivity with a high spec Ethernet controller, W5200, with twice the buffer size of v1.0 and support for up to eight simultaneous TCP/UDP connections. An included SD slot enables applications that require storing large amounts of data, like IoT data logging. Thank...
CREATIVE COMMONS LICENSE BY NC SA 3.0
the actionoiseboard decoding audio frequencies
for to set in motion motor,
is possible to use the board for set in motion motor
from remote, with audio frequencies sent in a video call,
the board have 10 pinout i2c for to connect
programmed at will to have fun turning lights on and off or giving the motors the desired movem...
Small version of the famous Transistor Tester from mikrocontroller.net featuring automatic detection of NPN and PNP bipolar transistors, N- and P-Channel MOSFETs,
JFETs, diodes, double diodes, N- and P-IGBTs, Thyristors, Triacs, resistors and capacitors.
This is a small pcb that is designed to be used on an electric go-kart to display a stopwatch, motor RPMs, and cart speed as well as record this data on an SD card with a time stamp for analysis. The project is Arduino based and is ran off of 7-59 VDC or directly from a 5V source through any of the 5V or VIN pins on the data logger shield (this is not a protected input). It is designed to have w...
12V 50Ω solenoid driver. Can be chained to control more than eight solenoids.
The solenoid driver uses a shift register with a latch to control its outputs such that a singe microcontroller (e.g. Arduino) can control large amounts of solenoids whilst only requiring 3 output pins.
This is a second version of Christmas Tree Controller. It is using Arduino Pro Mini and two TLC5940
For LED wiring refer to "Christmas Tree LED Wiring" project, LED v2
PCBs is just for reference. I didn't order/made one.
Program for Arduino is not ready yet. I will publish it as attachment or provide a link later.