The ESP Programmer is the successor of [ESP8266 Programmer](https://easyeda.com/fabiano.riccardi/esp8266-programmer), a board to upload firmware on ESP8266, ESP32, and ESP32-S2. Like the predecessor, it benefits the USB-C connector, but it is improved replacing the CH340 with Silicon Labs CP2104 USB-serial converter (smaller footprint), adding 2 LEDs to show the status of RX and TX line and improv...
ESP8266 Programmer is a breakout board to upload firmware on ESP8266. It benefits of USB-C connector, the new de-facto standard on the market.
It is designed to be attached to Lolin/Wemos D1 mini shield. If you are not going to use this form factor, you can break the external frame, gaining some mm^2 ([video](https://youtu.be/vi9zZSLOqzo)). Despite the name, it can be also used to program ESP32 an...
EU PCB for HA Switch Plate
The power board (top middle part) needs to be detached from main board and soldered perpendiculary to mainboard. Simply make solder bridges or use angle pins.
# Simple yet powerfull!
This board provides solid connection between Wemos D1 mini (ESP8266) and 2.4" TFT ILI9341 XPT2046 SPI Display (TJCTM24024-SPI). The main goal is to build cheap wi-fi enabled display with touch interface for use in various IoT projects. Display communicates with ESP8266 via SPI (di...