**PROJECT IN PROGRESS** PCB for Flight Controler based on STM32G071KBU6. Designed for fpv drones with 20x20mm stacks. As the MPU, the ICM-20602 has been selected. Fc supports both digital receivers (FLYSKY Ibus) and analogue receivers (CPPM). The flight controller can be powered from 1S and 2S Lipo. There is no built-in chip for OSD, but the corresponding uart pins were brought out to hook up exte...
# DC to DC power #
With following functionalities:
- Power a Raspberry PI with 2S-6S accumulator
- Fixations for a FPV emitter.
- Connexions from Raspberry-PI to FPV emitter
- Can also power a radio control receiver with several servos.