SparkFun BLE Mate 2

3 years ago 361
  • Description
  • Documents
  • BOM
  • Attachments
  • Members
  • Comments

Description

enter image description hereenter image description here

Description: This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakout board, in that nearly every pin on the on-board BC118 module is made available to access. This board is actually a close cousin to our Gold and Silver Bluetooth Mates and functions in a very similar way but, as the name implies, operates as Bluetooth Low Energy instead of Bluetooth 2.0.

The BLE Mate 2 offers a six-pin header on the end opposite the BC118 module which is used as a “host” serial pinout, the same as that on the FTDI Basic boards, which allows the BLE Mate 2 to be connected directly to any device with a matching header, such as the SparkFun Arduino Pro and Pro Mini. Coupled with the FTDI SmartBasic, you can even develop your code without having to swap cables! The board has built-in level translation, so it can be used with boards of higher voltage than the 3.3V default used by the BC118.

Each BLE Mate 2 offers BC118 module that is capable of accepting and transmitting via the UART at 9600bps (default) with a frequency band of 2,402 MHz to 2,480 MHz.

The SparkFun BLE Mate 2 only supports Bluetooth 4.0; it won’t connect to older devices. It’s also worth noting that BLE does not support a Serial Port Protocol as older versions of Bluetooth did; that makes interoperability between BLE dongles, devices, and modules harder than with Bluetooth Classic.

Features:

Bluetooth Certified 4.0 (BLE) Supply Voltage: 3.3V to 4.7 VDC Low power consumption : 16mA avg Frequency Band: 2,402 MHz to 2,480 MHz Operating Range: 30m Built-in antenna

For more detail and Documents, Please visit: http://www.sparkfun.com/products/13019

Documents

SparkFun_BLEMate2

BOM

ID Name Designator Footprint Quantity
1 BC118 U1 BC118 1
2 AP2202-ADJ U2 SOT23-5 1
3 JUMPER-PAD-3-2OF3_NC_BY_PASTE INP PAD-JUMPER-3-2OF3_NC_BY_PASTE_YES_SILK_FULL_BOX 1
4 JUMPER-PAD-2-NC_BY_PASTE REG PAD-JUMPER-2-NC_BY_PASTE_YES_SILK 1
5 BSS138 Q1 SOT-23 1
6 BLUE LED0 L-0603 1
7 RED LED1 L-0603 1
8 JUMPER-PAD-3-NC_BY_PASTE LEDS PAD-JUMPER-3-NC_BY_PASTE_YES_SILK_FULL_BOX 1
9 M09 JP2,JP3 1X09 2
10 10nF C1 C-0603 1
11 2.2uF C2 C-0603 1
12 1.0uF C3 C-0603 1
13 M06 JP4 1X06 1
14 FIDUCIAL FID1,FID2 FIDUCIAL-1X2 2
15 1k R1,R5,R8 3-0603 3
16 FTDI_BASIC JP1 FTDI_BASIC 1
17 100k R2 3-0603 1
18 10k R3,R4 3-0603 2
19 16.2k_1% R6 3-0603 1
20 26.7k_1% R7 3-0603 1

Attachments

None

Members

Success
The owner does not allow comments in this project now

Comments (0)

goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.