
KY-033 Hunt sensor module
STDKY-033 Hunt sensor module
License
:GPL 3.0
Description
The KY-032 Obstacle avoidance sensor module is part of the "37 In 1 Sensor Module Board Set Kit For Arduino" series, which is an IR photoelectric sensor for obstacle detection.
Of this type of sensors, they are available in two types: with 3 and 4 pins. The 3-pin version does not have the possibility to be enabled / disabled
By placing an obstacle in front of the transmission / reception diode, the output labeled with "out" switches to ground (low active).
The sensitivity of the photoelectric relay can be set with the potentiometer. The switching distance to the obstacle can reach approx. 7 cm. In addition, there is an Enable input ("EN") to activate the module (LOW = active, high = inactive). If the "EN" input is on, the module is permanently active, if the jumper is removed, the indicator on the "EN" input will choose the function of the sensor.
For further information KY-032 Obstacle avoidance sensor module
Design Drawing
BOM
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 10K | VR1 | RM065-V1 | 1 |
2 | 390 | R3 | 0603 | 1 |
3 | 1k | R2 | 0603 | 1 |
4 | 2k2 | R1 | 0603 | 1 |
5 | TCRT5000L | IR1 | TCRT5000L | 1 |

Project Members

Comment