© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD SC105 v1.0 Backplane with PSU for RC2014
License: Public Domain
Mode: Editors' pick
- 5
Update time：
2021-10-11 10:24:04
Creation time：
2018-06-13 08:54:58
Description
SC105 v1.0 (www.scc.me.uk)
Modular backplane with power supply for RC2014
Features:
- Modular design
- Expandable with additional sections
- Edge mounted expansion socket
Documentation at [www.scc.me.uk](http://www.scc.me.uk)
There is an alternative design with a through hole mounted expansion socket. See project SC112.
The attached picture shows a SC105 backplane extended with a SC113 backplane. Note the SC105 has an edge mounted connector while the SC113 has a through hole mounted connector.
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity | Mounted |
|---|---|---|---|---|---|
| 1 | RC2014 BUS | P1,P2,P3,P4,P5,P6 | RC2014-HDR-2X40-S-F-R-2.54MM | 6 | Yes |
| 2 | 100nF | C1,C2,C3,C4,C5,C6,C7 | CAP-RAD-2.54MM | 7 | Yes |
| 3 | POWER | J1 | DC_BARREL_JACK_PTH_SLOT_HOLE | 1 | Yes |
| 4 | ON/OFF | SW1 | SPDT_TOGGLE_SWITCH | 1 | Yes |
| 5 | 470R | R1 | AXIAL-0.3 | 1 | Yes |
| 6 | POWER | LED1 | LED-3MM/2.54 | 1 | Yes |
| 7 | POWER | J2 | SCREW-TERMINAL-X2 | 1 | Yes |
| 8 | 4k7 | R2 | AXIAL-0.3 | 1 | Yes |
| 9 | RESET | SW2 | TACTILE-PTH-SW | 1 | Yes |
Unfold
Project Members
1
5
Collect to album
Target complaint
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?