© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Solar panel li-po low power charger for esp8266
License: Public Domain
Mode: Editors' pick
- 3
Update time：
2021-03-02 14:06:03
Creation time：
2019-02-22 10:32:02
Description
Solar system power for esp8266 device like weather sensor. You need 5V 0.15W solar panel and small li-po battery for example 200mAh. Zener diode stabilizes voltage on 4.3, schottky diode give 0.15-0.2V voltage drop because 4.3V is too much for li-ion battery and prevents lekage current from battery. You can use panel also like binary(0/1) light sensor.
Keep It Simple Stupid
Not tested yet.
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | Solar_Panel 5V 0.15W | U2 | NONE | 1 |
| 2 | 1N5817 | D1 | DO-41 | 1 |
| 3 | BZX55C4V3 | D2 | DO-35 | 1 |
| 4 | Li-Po | BT1 | LIPO | 1 |
| 5 | HT7333 | U1 | TO-92(TO-92-3) | 1 |
| 6 | 1u | C1,C2 | RAD-0.1 | 2 |
| 7 | 100u | C3 | CAP-D3.0XF1.5 | 1 |
| 8 | 22k | R1 | AXIAL-0.3 | 1 |
| 9 | 10k | R2,R3,R4 | AXIAL-0.3 | 3 |
| 10 | ESP-12F(ESP8266MOD) | U3 | ESP-12F(ESP8266MOD) | 1 |
| 11 | BOOT | SW1 | KEY-6.0*6.0-4 | 1 |
| 12 | RESET | SW2 | KEY-6.0*6.0-4 | 1 |
Unfold
Project Members
0
3
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?