© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD DosingBox
License: CC-BY 3.0
Mode: Editors' pick
Features
- LM2596 input is DC3.2V~46V. The input voltage is depend on your DC motor. 12V or 24V DC motor should be OK.
- LM2596 output should adjust to 5V for ESP32 and L293D
- ESP32 can receive MQTT command to control DC motor
- ESP send PWM signal to L293D
ESP32 Source Code
https://github.com/samuelchiang/ESP32_Doser
PCB_DosingBox_手動
Open in EditorPCB_DosingBox_withGNDWire
Open in EditorPCB_DosingBox_tight
Open in EditorPCB_DosingBox_short_path
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | M04 | HTUJP1 | 1X04 | 1 |
2 | OLED 0.96 INCH 128X64 I2C | OLEDDS1 | OLED 0.96 INCH 128X64 I2C | 1 |
3 | ESP32 | U4 | ESP32 | 1 |
4 | 12VDC | DC1 | DC-IN-TH_DC005 | 1 |
5 | OUTPUT | P1,P2,P3,P4 | CONN-TH_2P-P5.00 | 4 |
6 | L293D | U1,U3 | DIP-16_16P-L20.2-W6.6-P2.54-LS7.6-BL | 2 |
7 | lm2596 | U2 | LM2596-MODULE | 1 |
Unfold
Loading...
Do you need to add this project to the album?