© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Intellivision Secam P2 - RGB out
License: CERN Open Hardware License
Mode: Editors' pick
Cloned from Intellivision Secam to RGB
This project allows to connect an Intellivision to a modern disply device using RGB (SCART) signals.
This module works for "SECAM P2" or and most PAL versions of the console having an LM1886N on board.
This module also ca, also be used in VideoPAC and Atari VCS SECAM consoles with same RGB (SCART) output.
The schematic is mainly three 3bits DACs for Red, Green and Blue signals.
The SYNC signal is buffered and can be inverted or not (invertion is required for VideoPAC console).
Audio signal is justed passed through a capacitor to remove potential DC offset.
The attached document provides instatlation details in all 3 consoles and provide also require SCART cable cabling.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 22uF | C1,C2 | C0805 | 2 |
2 | 100pF | C3,C4,C5 | C0805 | 3 |
3 | 47nF | C6 | C0805 | 1 |
4 | Header-Male-2.54_1x8 | H1 | HDR-TH_8P-P2.54-V-M | 1 |
5 | Solder Jumper | J1,J2,J3,J4 | SOLDER JUMPER 3 PAD | 4 |
6 | HDR-IDC-2.54-2X7P | P1 | IDC-TH_14P-P2.54-V-R2-C7-S2.54 | 1 |
7 | 470 | R1,R4,R7,R10 | R0805 | 4 |
8 | 1K | R2,R5,R8 | R0805 | 3 |
9 | 2K | R3,R6,R9 | R0805 | 3 |
10 | SN74HCT573PW | U1,U2 | TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | 2 |
11 | SN74LVC1G14DBVR_C434069 | U3 | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | 1 |
Unfold
Loading...
Do you need to add this project to the album?