| Title: | AL8861 |
| Package: | -SOT89-5_N |
| Description: | The DIODESTM AL8861 is a hysteresis-mode DC-DC step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device can operate from an input supply between 4.5V and 40V and provide an externally adjustable output current up to 1A for TSOT25 package and 1.5A for SOT89-5 and MSOP-8EP packages. Depending upon supply voltage and external components, this converter can provide up to 40W of output power. The AL8861 integrates the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Dimming can be realized by applying an external control signal to the VSET pin. The VSET pin will accept either a DC voltage signal or a PWM signal. The soft-start time can be adjusted by an external capacitor from the VSET pin to Ground. Applying a voltage of 0.2V or lower to the VSET pin can turn off the output and make the device enter into standby state with low current consumption. |
Brand new interactions and interfaces. 
Easy to use and quick to get started. 