Please read the sticky Forum topic marked as [Must read]: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)

sorry if I posted in the wrong place my eyesight not to good - I kind of get lost in the forums not sure where to go or to post things. I use the search it’s great but could not find what I needed for this.again, sorry and guess I’m good then…

@rayvt56, The reasons I pointed you to the [Must read] topic are because: 1. Your project is private so only you can see it; 2. You have not provided any screenshots or other images to illustrate your question; 3. You have not provided any links to datasheets or product pages to illustrate the type of component you are using as an example; 4. With no supporting information it is not possible to make informed, useful suggestions that might help you; The [Must read] topic specifically asks that posters provide sufficient information from which others can make an informed reply. As it stands you are taking unfair advantage of the expertise available on the forum because your question can only be answered in very woolly, general terms and so assumes that someone is prepared to write suggestions, which may or may not be helpful to you and save you time but which will certainly take up their time. * Ways to assist screen reading: I don't know if you are aware of these web browser functions but if you press CTRL and the + key you can zoom in. CTRL and the - key zooms out. CTRL and the 0 (zero) key resets the view to 100%. Images in posts in the forum may not zoom properly but if you right-click on them and select **Open image in new tab** then they will zoom in the new tab. Beware however of trying to use the EasyEDA Editors at any scale other than 100% (CTRL+0) because they may not operate correctly.