Hi, I see that the BG95 is available for "JLCPCB SMT" (which is what I intend to use on my project), but when I click the part number (C2960993), it takes me to https://www.lcsc.com/search?q=C2960993&&type=1&ref=editor, which shows a null search. I have tried to look for the BG95 on the standard lcsc.com site, and nothing shows up. However, on szlcsc.com it shows up. What happened here? Is it fine for me to use a BG95 module for my upcoming EasyEDA project for which I'll use the JLCPCB SMT.
This is pretty interesting. Okay, worst case scenario I would be able to source the components using that. However, if it gets canelled as it happened to the other forum member, I'm in deep trouble, since this particular part is critical (it's the heart of the design) and it's not easy to solder (has pads under it, which I surely use).
Now, what's the difference with lcscsz.com? Why does this part show up there? see https://item.szlcsc.com/3348207.html (same ID, C2960993).
I'm just confused. But oh well, if they can source it from global sources, it'll be fine. I'll have to wait until I have the design ready to figure out if they can do it.
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
You could try JLCPCB's Global Sourcing route:
https://support.jlcpcb.com/article/192-how-to-use-jlcpcb-global-sourcing-parts-service
but beware:
https://easyeda.com/forum/topic/Global-Sourcing-Parts-da948bcc4cf8419b9c8996a90a16099d