The BOM on the project page (you scroll down, BOM, BOM Download, Purchase Parts) only has a few parameters of the actual BOM, important parameters are not included like part numbers. but the BOM in the editor have them included like lcsc part number, manufacturer part number etc. when i order parts for a project on OSHWlab, it picks the generic parts it can find by value and package, not the parts that the parts that the real bom actually specifies. i had the problem with inductors on a project. (see bom below) i specified inductors with 100uh in a L1210 package with a max current of 150mA after ordering pcb's it automatically picked inductors with 100uh in a L1210 package but with 40mA since it was the first result when searching for these parameters it totally ignored the lcsc part number and manufacturer part number specified because they are no included in the BOM on the project site when i used the bom that i exported from the same project, but after opening it in the editor, it included all important data BOM Download from project page  it selected this part [https://www\.lcsc\.com/product\-detail/Inductors\-SMD\_span\-style\-background\-color\-ff0\-TDK\-span\-NLV32T\-101J\-EF\_C295124\.html](https://www.lcsc.com/product-detail/Inductors-SMD_span-style-background-color-ff0-TDK-span-NLV32T-101J-EF_C295124.html)<br> <br> BOM from same project exported within the editor  here the correct part was assembled [https://www\.lcsc\.com/product\-detail/Inductors\-SMD\_100uH\-20\_C27775\.html](https://www.lcsc.com/product-detail/Inductors-SMD_100uH-20_C27775.html)